Axiom Audio FMS QS Quick Setup Manual

Download Quick setup manual of Axiom Audio FMS QS Racks & Stands, Speakers for Free or View it Online on All-Guides.com.

Brand: Axiom Audio

Category: Racks & Stands , Speakers

Type: Quick setup manual for Axiom Audio FMS QS

Pages: 2 (0.6 Mb)

Download Axiom Audio FMS QS Quick setup manual

Axiom Audio FMS QS Quick setup manual - Page 1
1
Axiom Audio FMS QS Quick setup manual - Page 2
2
FMS QS - Speaker Stand
Quick Setup Guide
FMS QS - Support Tout-en-Métal
Guide d’installation rapide
STEP 1 / Êtape 1
Turn the threaded end of the pillars, clockwise into the metal base. Tighten these parts together.
Tournez l’extrémité lee des colonnes dans le sens des aiguilles d’une montre dans la base de
métal. Serrez ces pièces ensemble.
STEP 2 / Êtape 2
Run your speaker wire inside the pillar. Place the collars on top of the pillars with the speaker wire
running through the notch in the collar. Leave enough wire to connect to the speaker later on. Tighten
the six set screws. Do not over-tighten these screws.
Faites passer le l d’enceinte à l’intérieur de la colonne. Positionnez le cols sur le dessus de la
colonnes. Faites passer le l d’enceinte à l’inrieur par l’encoche pratiquée dans le col. Laissez
assez del pour pouvoir le raccorder à l’enceinte plus tard. Serrez les six vis de pression. Évitez de
trop serrer ces vis.
STEP 3 / Êtape 3
Remove two screws from the support bracket using supplied wrench. Line up holes in the bracket to
the underside of the top platform. Insert two screws through the top platform into the support bracket
and tighten.
À l’aide de la clé fournie, retirez les deux vis du support. Alignez les trous du support à ceux du
dessous de la plaque du haut. Par le dessus de la plaque du haut, insérez deux vis dans les orices
de la plaque et vissez-les fermement au support.
STEP 4 / Êtape 4
Position your speaker onto the platform.
Install the metal plates between the screws in the tabs and your speaker. Tighten the screws to
secure the speaker onto the stand. Do not over tighten these screws.
Positionnez votre enceinte sur la plateforme.
Installez les plaquettes de tal entre les vis de languettes et votre enceinte. Serrez les vis pour bien
arrimer l’enceinte sur le support. Évitez de trop serrer ces vis.
STEP 5 / Êtape 5
Connect your speaker wire to the speaker.
Branchez le l d’enceinte à votre enceinte.
FMS QS
Dimens. H W D (inches):
Dimens. H W D (mm):
Weight kg each:
Weight lbs each:
43x 11.5” x 10.5
1092 x 292 x 267
3.357 kg
7.4 lbs
Dimensions HLP pouces :
Dimensions HLP mm:
Poids en Kilo chacun :
Poids en lb chacun :