Lindy 32 983 User Manual

Download Operation & user’s manual of Lindy 32 983 Switch for Free or View it Online on All-Guides.com.

Brand: Lindy

Category: Switch

Type: Operation & user’s manual

Model: Lindy 32 983 , Lindy 32 984

Pages: 2

Download Lindy 32 983 Operation & user’s manual

Lindy 32 983 Operation & user’s manual - Page 1
1
Lindy 32 983 Operation & user’s manual - Page 2
2
10BaseT Mini Hub
4 port version: 32 983
8 port version: 32 984
Installation and Use English
Benutzerhandbuch Deutsch
Manuel Français
Manuale Uso Italiano
LINDY Art. Nr. 32 983, 32 984
© LINDY ELECTRONICS LIMITED & LINDY- ELEKTRONIK GMBH - JAN 2000
English Manual
Overview
The LINDY 10BaseT hubs are compatible with IEEE 802.3 10BaseT
standard. The hubs are very compact and can be used in places with
very limited space.
Features
IEEE 802.3 10BaseT compliant
4/8 ports
Uplink port
Supports STP and UTP Ethernet networks
Status LEDs for Power, Link, Activity and Collision
External power supply
Package Contents
This manual
4/8 port LINDY Ethernet hub
AC/DC power supply
Installation and Use
Connect the power supply to the mains and to the 10BaseT hub.
Connect the hub to your network interface card using a standard patch
lead. To connect the hub to another hub, use a standard patch lead
and connect it to the Uplink port of one of hubs.
Ethernet 10BaseT General Information
Please regard the following 10BaseT rules:
It is a star topology that requires no terminators.
The maximum length of 10BaseT between two hubs is 100m.
The maximum length of 10BaseT between the hub and network
interface card is 100m (including the patch cables).
Troubleshooting
If your Ethernet network seems to operate very slowly and the Collision
LED is illuminated almost all of the time during operation it may be due
to one of the following problems:
Cables are damaged, not compliant or not connected properly
The network traffic is too high
At first you should check all the cables and connections. If the situation
does not change it may be due to the fact there is too much traffic on
the network. In this case the situation should be analysed by a
professional network specialist.
Deutsches Benutzerhandbuch
Übersicht
Die LINDY 10BaseT Hubs sind kompatibel zum IEEE 802.3 Standard.
Sie sind sehr kompakt und können auch an Orten mit sehr begrenztem
Platzangebot eingesetzt werden.
Eigenschaften
IEEE 802.3 10BaseT kompatibel
4 (8) Ports inklusive 1 Uplink Port mit RJ-45 Buchsen
unterstützt STP und UTP Ethernet Netze
Status LEDs für Betriebsbereitschaft, Verbindung, Kollisionen
Externes Steckernetzteil
Packungsinhalt
Dieses Handbuch
4 (8) Port LINDY 10BaseT Hub
Externes Steckernetzteil
Installation und Bedienung
Stecken Sie das Steckernetzteil in die Steckdose und verbinden Sie es
mit dem 10BaseT Hub. Schließen Sie dann Ihre Endgeräte mit LINDY
Patchkabeln an die Downstream Ports an sowie den Upstream Port
zum Server bzw. zum Upstream Hub. Bei Verwendung von Standard
Patchkabel ist am Uplink Port die Einstellung Uplink zu wählen.
Ethernet 10BaseT General Information
Beachten Sie bitte die Richtlinien für Strukturierte Verkabelung von
10BaseT Ethernet Netzwerken.
10BaseT ist ein Punkt-zu.Punkt Netzwerk in Sterntopologie.
Es darf keine Ringverbindung hergestellt werden.
Es sind keine Terminatoren an den Endpunkten zu verwenden.
Ein 10BaseT Netzwerk darf bis zu 5 Netzwerkebenen beinhalten.
Es müssen RJ-45 STP oder UTP Kabel verwendet werden, die
zumindest der Kategorie 3 (Level 3) entsprechen.
Die Maximallänge eines 10BaseT Segmentes beträgt 100m je
Verbindung (inklusive Wand- und Anschlusskabel).
Der Uplink Port - in der Einstellung Uplink - dient zum Anschluß des
Hubs an den Server bzw. zum Upstream Hub mit Standard Patch
Kabel.
Fehlersuche
Wenn Ihr Ethernet Netzwerk fehlerhaft oder nur sehr langsam arbeitet
und wenn die Collision LED fast ununterbrochen leuchtet kann dies
grundsätzlich zwei Ursachen haben:
Kabel sind defekt, nicht kompatibel oder nicht richtig
angeschlossen
Es werden zu viele Daten über das Netzwerk transportiert
Im ersten Falle überprüfen Sie Kabel und Anschlüsse nacheinander.
Im zweiten Falle sollten Sie die Umstellung auf ein 100BaseT Netz in
Erwägung ziehen. Lassen Sie ihr Netzwerk von einem qualifizierten
Netzwerktechniker überprüfen.