Linksys PAP2 Quick Start Manual
Download Quick start manual of Linksys PAP2 Adapter, Network Card for Free or View it Online on All-Guides.com.
Brand: Linksys
Category: Adapter , Network Card , Network Router , Telephone Accessories
Type: Quick start manual for Linksys PAP2
Pages: 3
1
2
3
Fratelecom Ltd.
Quick Start Guide
Setting up your LINKSYS PAP2 Phone Adaptor for Use with
Fratelecom’s ITSP Service
Fratelecom ITSP Service provides a flexible and cost-effective alternative for making long-distance and
international phone calls. If you are a Linksys PAP2 user, you may now enjoy our service by properly
configuring some of the settings on your phone.
A. Before You Start
Before you start, please make sure you have the followings provided by Fratelecom. If not, please
contact [email protected]
•12-digit ITSP account
•6-digit password
Please follow the steps below to configure your Linksys PAP2. For other settings, please refer to your
Linksys operation manual.
B. Configurations from Web Browser
1. Select a computer which is able to connect to your Linksys PAP2. Open the web browser and on
the address bar type your Linksys PAP2 web administration address such as
“http://192.168.2.159/admin/” where 192.168.2.159 is the IP address assigned to Linksys PAP2.
Note: When accessing, “ /admin/ ” must be followed by the IP address in order to log in Linksys’
VoIP Web Server successfully.
2. On the Main Menu, click Line 1 to access to the setup page as follows.
3. On the Line 1 Setup Page, set the following items.
SIP Port 5060 User ID Same as your auth ID
Proxy 203.66.6.210 Use Auth ID Yes
Password 6-digit password Preferred Codec G723
Auth ID 12-digit ITSP account
1