• Home
• Brands
• Linksys Manuals
• Linksys EPSX3 - EtherFast PrintServer Print Server
• Linksys EPSX3 Install Manual

Linksys EPSX3 Install Manual

Download Quick installation of Linksys EPSX3 - EtherFast PrintServer Print Server Network Hardware, Printer for Free or View it Online on All-Guides.com.

1

2

Package Contents

• One EtherFast 10/100 3-Port PrintServer

or

One EtherFast 10/100 1-Port PrintServer

(1)

• One Setup Utility CD-ROM (2)

• One Power Adapter (3)

• One User Guide (not shown)

• One Registration Card and Quick

Installation (not shown)

Instant EtherFast® Series

Installation Process

For more detailed instructions, please refer to the User Guide.

The PrintServer does not have a power switch. Whenever its power adapter

is plugged in, the PrintServer is powered on. The PrintServer can be pow-

ered on before, during, or after your network is powered on.

Connecting the PrintServer to Your Network

A. Plug one end of a UTP Category 5 (or better)

cable into the PrintServer’s LAN port.

B. Connect the other end of the cable to a net-

worked hub or switch.

Connecting a Printer to the PrintServer

C. Connect your printer to the PrintServer’s

Printer (LPT) port with your printer cable.

Repeat this step as needed for the 3-Port

PrintServer.

D. Turn on your printer.

Installing the PrintServer

Connecting the Power

E. Plug the power adapter into the PrintServer’s

Power port.

F. Plug the AC power adapter into the electrical

outlet.

G. The LAN LED on the PrintServer’s front will light up. If the LAN LED

does not light up, see the Troubleshooting section of the User Guide.

A. To begin driver installation click

Start and select Run. Type

D:\Driver\Win9xnt\setup.exe

(where “D” is the letter of your

CD-ROM drive) in the Open field

that appears. Click OK.

B. The Welcome screen appears. Read the text that appears and click Next.

C. Click Next to accept the default

Destination Directory (recom-

mended). If you choose to use

another directory, click Browse

and choose the appropriate direc-

tory. Then, click Next.

D. The following screen will assign a

Program Folder from the

Windows Taskbar. The default

Program Folder is the Linksys

PrintServer Driver. Click Next to

continue.

C

A

EtherFast 10/100

PrintServers

This Quick Installation is meant to help you install the product quickly and easily. For detailed instructions on installation,

configuration, and further setup options, please consult the User Guide.

EPSX3 ver. 2

PPSX1 ver. 2

Continued on back!

Installing the PrintServer’s Drivers

NNoottee

: Make sure that IP addresses are assigned to the PrintServer and PC(s). The PrintServer is set

for DHCP by default.

C

D

A

E

NNOOTTEE::

Only use the power adapter packaged with the PrintServer.

Using a different power adapter could damage the PrintServer.