Linksys SPA2102-AN - Single Port Router Administration Manual
Download Administration manual of Linksys SPA2102-AN - Single Port Router Adapter, Network Router for Free or View it Online on All-Guides.com.
Brand: Linksys
Category: Adapter , Network Router
Type: Administration manual for Linksys SPA2102-AN - Single Port Router
Pages: 241
Download Linksys SPA2102-AN - Single Port Router Administration manual
ATA Routing Field Reference
LAN Status page
Cisco Small Business ATA Administration Guide 111
A
Router tab > WAN Setup page >
VLAN Settings section
LAN Status page
You can use the LAN Status page to view the LAN settings. This page includes the
following sections:
• “Networking Service section,” on page 111
• “LAN Networking Settings section,” on page 112
• “Static DHCP Lease Settings section,” on page 112
Router tab > LAN Setup page >
Networking Service section
Maximum Uplink
Speed
The maximum bandwidth for LAN to WAN throughput.
The default is 128 kbps.
Enable VLAN Allows (yes) or prevents (no) VLAN access.
NOTE: Choose yes if your ATA device is connected to
a switch that uses VLAN tagging.
VLAN ID The VLAN tag for the VLAN to which the ATA device is
assigned.
Networking Service NAT—the unit acts as a router and provides IP
addresses to PCs attached to the LAN port.
Bridge—The unit acts as a switch, a passthrough, and
does not give IP addresses.