• Home
• Brands
• Linksys Manuals
• Linksys WAP54G - Wireless-G Access Point
• Linksys Wireless-G Access Point WAP54G Quick Install

Linksys Wireless-G Access Point WAP54G Quick Install

Download Quick installation of Linksys WAP54G - Wireless-G Access Point Wireless Access Point for Free or View it Online on All-Guides.com.

1

2

A Division of Cisco Systems, Inc.

®

Model No.

Quick Installation

Model No.

Wireless

WAP54G

Access Point

Wireless-G

Package Contents

• Wireless-G Access Point

• Detachable Antennas

• Power Adapter

• Setup CD with User Guide

• Ethernet Network Cable

• Quick Installation

• Registration Card

1

A Locate an optimum location

for the Access Point. The best

place for the Access Point is

usually at the center of your

wireless network, with line of

sight to all of your PCs and

wireless accessories.

B Fix the direction of the

antenna. Try to place it in a

position that will best cover

your wireless network. Nor-

mally, the higher you place the

antenna, the better the perfor-

mance will be. The antenna's

position enhances the receiv-

ing sensitivity.

C Connect a standard Ethernet

network cable to the Access

Point. Then, connect the other

end of the Ethernet cable to a

switch or router. The Access

Point will then be connected to

your 10/100 Network.

D Connect the AC Power

Adapter to the Access Point's

Power Socket. Only use the

power adapter supplied with

the Access Point. Use of a dif-

ferent adapter may result in

product damage.

2

C The next screen displayed dis-

plays how the Access Point

should be connected while

running this Setup Wizard. Opti-

mally, you should perform this

setup through a PC on your

wired network. Click the Next

button to continue the Setup

Wizard.

D The Setup Wizard will run a

search for the Access Point

within your network and then

display a list along with the sta-

tus information for each

access point. If this is the only

access point on your network, it

will be the only one displayed.

If there are more than one dis-

played, select the Access Point

by clicking on it and click the

Yes button to continue the

Setup Wizard.

E You will be asked to sign onto

the Access Point you've

selected. Enter the Password

you've assigned. If none has

been assigned, enter the

default password: admin.

Then, click the OK button. (This

password can be changed

from the Web-based Utility's

Password tab.)

B

C

Now that you've connected the

Access Point to your wired network,

you are ready to begin setting it up.

This Setup Wizard will take you

through all the steps necessary to

configure the Access Point.

A Insert the Setup Wizard CD into

your PC's CD-ROM drive. Your

PC must be on your wired net-

work to set up the Access Point.

B The Setup Wizard's Welcome

screen should appear on your

monitor. If it does not, this

means the Setup Wizard is not

automatically running as it

should. Start the Setup Wizard

manually by clicking the Start

button, selecting Run, and typ-

ing d:\setup.exe (where "D" is

your PC's CD-ROM drive). Click

the Setup button to continue

this Setup Wizard. Clicking

Install Linksys Wireless Guard

Client installs the client soft-

ware, and the User Guide but-

ton opened this Guide. To exit

this Setup Wizard, click the Exit

button.

D

NOTE: The Access Point should be

configured through the Setup Wizard

and set up through a wired network

connection.

GHz

2.4

802.11g

Configuring the Access Point

Connecting the Access Point

E