• Home
• Brands
• Linksys Manuals
• Linksys WRT54GP2 - Wireless-G Broadband Router
• Linksys WRT54GP2 Package Contents

Linksys WRT54GP2 Package Contents

Download Quick installation of Linksys WRT54GP2 - Wireless-G Broadband Router Adapter, Wireless Router for Free or View it Online on All-Guides.com.

1

2

A Division of Cisco Systems, Inc.

®

Model No.

Quick Installation

Model No.

Wireless

WRT54GP2

Broadband Router

Wireless-G

Package Contents

• Wireless-G Broadband Router with 2 Phone Ports

• Setup Wizard CD-ROM with Norton Internet Security

•User Guide on CD-ROM

• Quick Installation

•Network Cable

• Power Adapter

1

D If you have a second Internet

phone line, repeat step C to

connect a telephone or fax

machine to the Router’s

PHONE 2 port.

E Connect your cable or DSL

modem’s Ethernet cable to the

Router’s Internet port.

F Power on the cable or DSL

modem.

G Connect the included power

adapter to the Router’s Power

port, and then plug the power

adapter into an electrical

outlet.

The Power LED on the front

panel will light up as soon as

the power adapter is

connected properly.

H Power on the PC you wish to

use to configure the Router.

In Step 2, you will need the setup

instructions provided by your Internet

Service Provider (ISP). If you do not

have this information, then contact

your ISP before proceeding.

The instructions from your ISP tell you

how to set up your PC for Internet

access. Because you are now using

the Router to share Internet access

among several computers, you will

use the setup information to

configure the Router instead of

your PC.

A Open your PC’s web browser.

Enter http://192.168.1.1 (the

Router’s default local IP

address) in the web browser’s

Address field. Then press the

Enter key.

B A screen will appear and ask

you for a User Name and

Password. Leave the User

Name field blank, and enter

admin (the default) in the

Password field. (Later you

should set a new password

using the Administration tab’s

Management screen. This will

help secure access to the

Web-based Utility.)

Then click the OK button.

Connect the Router

GHz

2.4

802.11g

There are two ways to configure the Router. Choose one of the following:

• Run the Setup CD-ROM - It is strongly recommended that you use the

Setup CD-ROM. Insert the Setup CD-ROM into the CD-ROM drive, and

follow the on-screen instructions.

•Use this Quick Installation guide - If you wish, you can use the Router’s

Web-based Utility. Proceed to Step 1 of this Quick Installation.

A Make sure that all of your

hardware is powered off,

including the Router, PCs, and

cable or DSL modem.

B Connect one end of an

Ethernet network cable to one

of the numbered ports on the

back of the Router. Connect

the other end to an Ethernet

port on a network device, e.g.,

a PC, print server, or switch.

Repeat this step to connect

more PCs or other network

devices to the Router.

C If necessary, disconnect the

RJ-11 telephone cable of your

telephone from the telephone

wall jack. Then connect that

end to the Router’s PHONE 1

port.

C

B

NOTE: Make sure your telephone

is set to its tone setting (not

pulse).

E

G

2

Configure the Broadband Router

B

A

NOTE: Make sure your PC’s

Ethernet adapter is set to obtain

an IP address automatically. For

more information, refer to

Windows Help.

with 2 Phone Ports