Linksys WRV54G Install Manual
Download Quick installation of Linksys WRV54G - Wireless-G VPN Broadband Router Wireless Network Router, Wireless Router for Free or View it Online on All-Guides.com.
Brand: Linksys
Category: Network Router , Wireless Router
Type: Quick installation for Linksys WRV54G - Wireless-G VPN Broadband Router Wireless
Pages: 2
Download Linksys WRV54G - Wireless-G VPN Broadband Router Wireless Quick installation
1
2
A Division of Cisco Systems, Inc.
®
Model No.
Quick Installation
Model No.
Wireless
WRV54G
VPN Broadband Router
Wireless-G
Package Contents
• Wireless-G VPN Broadband Router
• Setup Wizard CD-ROM
• User Guide on CD-ROM
• Ethernet Network Cable
• Adapter Stands
• Power Supply
• Quick Installation
• Registration Card
1
22
For Windows 98, Millennium, and XP
using the default interface, refer to
the User Guide on the Setup CD-
ROM or your Windows documenta-
tion.
The following instructions apply only
to Windows 2000 or XP using the
Classic interface (in which the icons
and menus look like previous Win-
dows versions).
A Click the Start button. Select
Settings and click the Control
Panel icon. Double-click the
Network and Dial-up
Connections icon.
B Select the Local Area Connec-
tion icon for the applicable
Ethernet adapter (usually it is
the first Local Area Connection
listed). Double-click the Local
Area Connection. Click the
Properties button.
C Make sure the box next to Inter-
net Protocol (TCP/IP) is
checked. Highlight Internet Pro-
tocol (TCP/IP), and click the
Properties button.
D Select Obtain an IP address
automatically. Once the new
window appears, click the OK
button. Click the OK button
again to complete the PC
configuration, then restart your
computer.
Proceed to Step 3.
E
C
Configure the PCs
B
D
GHz
2.4
54Mbps
There are two ways to configure the Router. Choose one of the following:
• Run the Setup CD-ROM - It is strongly recommended that you use the
Setup CD-ROM to install the Router. Insert the Setup CD-ROM into the
CD-ROM drive, and follow the on-screen instructions.
•Use this Quick Installation guide - If you wish, you can use the Router’s
web-based utility to install the Router. Proceed to Step 1, and follow
the Quick Installation’s instructions.
A Before you begin, make sure
that you have the setup infor-
mation for your specific type of
Internet connection. The instal-
lation technician from your ISP
should have left this informa-
tion with you after installing
your broadband connection. If
not, you can call your ISP to
request the settings.
B Make sure that all of your net-
work’s hardware is powered off,
including the Router, PCs, and
cable or DSL modem.
C Connect one end of an Ethernet
network cable to one of the LAN
ports (labeled 1-4) on the back of
the Router (see Figure C), and the
other end to an Ethernet port on a
PC.
1
Connect the Router
D Repeat this step to connect more
PCs, a switch, or other network
devices to the Router.
E Connect a different Ethernet net-
work cable from your cable or DSL
modem to the Internet port on the
Router’s back panel (see Figure E.)
This is the only port that will work for
your modem connection.
F Power on the cable or DSL
modem.
G
Connect the power adapter to the
Router’s Power port (see Figure G),
and then plug the other end into
an electrical outlet.
H Power on the following devices in
this order: cable or DSL modem,
Router, and PCs.
I The Power and Internet LEDs on the
front panel will light up green as
soon as the power adapter is con-
nected properly.
The Power LED will flash for a few
seconds. It will light up steady when
the self-test is complete. If this LED
stays on for one minute or longer,
see “Appendix A: Troubleshoot-
ing.”in the User Guide on the Setup
Wizard CD-ROM.
The Router’s hardware installation is
now complete.
Proceed to Step 2
NOTE: Before setting up the
Router, make sure your PCs are
configured to obtain an IP (or
TCP/IP) address automatically
from the Router.
IMPORTANT: Make sure to use
the power adapter that is sup-
plied with the Router. Use of a
different power adapter could
damage the Router.
C
G