B&C Speakers HF Drivers DE200 Specifications
Download Specifications of B&C Speakers HF Drivers DE200 Portable Speakers for Free or View it Online on All-Guides.com.
Brand: B&C Speakers
Category: Portable Speakers
Type: Specifications for B&C Speakers HF Drivers DE200
Pages: 1 (0.1 Mb)
1
DE200
HF Drivers
LF Drivers LF Nd Drivers Coaxials HF Drivers Horns
100 W continuous program power capacity
1” horn throat diameter
44 mm (1.7 in) aluminium voice coil
Titanium diaphragm
1000 – 18000 Hz response
106 dB sensitivity
Specifications
Throat Diameter (1) 25 mm (1 in)
Nominal Impedance (2) 8 ohm
Minimum Impedance 7.5 ohm
Nominal Power Handling (3) 50 W
Continuous Power Handling (4) 100 W
Sensitivity (1W/1m) (5) 106 dB
Frequency Range 1 -18 kHz
Recommended Crossover (6) 1.6 kHz
Voice Coil Diameter 44 mm (1.7 in)
Winding Material Aluminium
Inductance 0.11 mH
Diaphragm Material Titanium
Flux Density 1.5 T
Mounting and Shipping Info
Two M5 holes 180° on 76 mm (3
in) diameter
Three M6 holes 120° on 57 mm
(2.2 in) diameter
Overall Diameter 102 mm (4.0 in)
Depth 61 mm (2.4 in)
Net Weight (1 unit) 1.7 kg (3.7 lb)
Shipping Weight (8 units) 14.6 kg (32.1 lb)
Shipping Box (8 units) 230x230x160 mm
(9x9x6.3 in)
1
Driver mounted on B&C ME45 horn
2
Also available in 16 ohms, data upon request
3
2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance.
4
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
5
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
6
12 dB/oct. or higher slope high-pass filter.