Maytag 500 Series Use And Care Manual

Download Use and care manual of Maytag PRECISION TOUCH CONTROL 500 Ranges for Free or View it Online on All-Guides.com.

Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 1
1
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 2
2
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 3
3
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 4
4
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 5
5
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 6
6
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 7
7
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 8
8
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 9
9
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 10
10
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 11
11
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 12
12
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 13
13
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 14
14
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 15
15
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 16
16
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 17
17
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 18
18
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 19
19
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 20
20
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 21
21
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 22
22
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 23
23
Maytag PRECISION TOUCH CONTROL 500 Use and care manual - Page 24
24
11
Oven Cooking
6. Check cooking progress. Cook longer if needed.
7. When cooking is finished, press CANCEL.
8. Remove food from the oven.
Notes:
To change the oven temperature during cooking,
press the Bake pad and then the More+ or Less- pad
until the desired temperature is displayed.
To change the oven temperature during preheat,
press the Bake pad twice, then press the More+ or
Less- pads until the desired temperature is displayed.
If you forget to turn off the oven, it will automatically shut
off at the end of 12 hours. If you wish to deactivate this
feature, see page 13.
Cook & Hold
Cook & Hold allows you to bake for a preset amount of time,
followed by a one-hour Keep Warm cycle.
To set Cook & Hold:
1. Press the Cook & Hold pad.
BAKE and HOLD flash.
000 lights in the display.
2. Select the oven temperature. The oven
temperature can be set from 170° to 550°. Press
or press and hold the More+ or Less- pad.
Press the More+ pad to increase the temperature.
Press the Less- pad to decrease the temperature.
3. Press Cook & Hold again OR wait four seconds.
HOLD flashes.
00:00 flashes in the display.
4. Enter the amount of time you want to bake by pressing the
More+ or Less- pad. Bake time can be set from ten
minutes (00:10) to 11 hours, 59 minutes (11:59).
BAKE and HOLD light in the display.
The baking time will light in the display.
The baking time will start counting down.
Baking Differences Between Your Old
and New Oven
It is normal to notice some baking time differences between a
new oven and an old one. See Adjusting the Oven Temperature
on page 13.
When the cooking time has elapsed:
Four beeps will sound.
BAKE will turn off.
HOLD and WARM will light.
170° will display.
CAUTION
Do not use delayed baking for highly perishable foods such
as dairy products, pork, poultry, or seafood.
When using Delay, the oven begins to cook later in the day.
Set the amount of time that you want to delay before the oven
turns on and how long you want to cook. The oven begins to
heat at the selected time and cooks for the specified length of
time, then keeps food warm for up to one hour.
Delay time can be set from 10 minutes (00:10) to 11 hours, 59
minutes (11:59).
To set a Delayed Baking cycle:
1. Press the Delay pad.
DELAY flashes.
00:00 appears in the display.
2. Press the More+ or Less- pad to set the
delay time.
While DELAY is still flashing:
3. Press the Cook & Hold pad.
000 lights in the display.
BAKE and HOLD flash.
4. Press More+ pad to set the baking
temperature.
00:00 and HOLD flash.
BAKE stays lit.
Delay Bake
After one hour in HOLD WARM:
“End” will display.
The time of day reappears in the display.
To cancel Cook & Hold at any time:
Press the CANCEL pad. Remove food from oven.