Maytag MDG-50 Installation Manual

Download Installation manual of Maytag MDG-50 Dryer, Furnace for Free or View it Online on All-Guides.com.

Brand: Maytag

Category: Dryer , Furnace

Type: Installation manual for Maytag MDG-50

Pages: 55

Download Maytag MDG-50 Installation manual

Maytag MDG-50 Installation manual - Page 1
1
Maytag MDG-50 Installation manual - Page 2
2
Maytag MDG-50 Installation manual - Page 3
3
Maytag MDG-50 Installation manual - Page 4
4
Maytag MDG-50 Installation manual - Page 5
5
Maytag MDG-50 Installation manual - Page 6
6
Maytag MDG-50 Installation manual - Page 7
7
Maytag MDG-50 Installation manual - Page 8
8
Maytag MDG-50 Installation manual - Page 9
9
Maytag MDG-50 Installation manual - Page 10
10
Maytag MDG-50 Installation manual - Page 11
11
Maytag MDG-50 Installation manual - Page 12
12
Maytag MDG-50 Installation manual - Page 13
13
Maytag MDG-50 Installation manual - Page 14
14
Maytag MDG-50 Installation manual - Page 15
15
Maytag MDG-50 Installation manual - Page 16
16
Maytag MDG-50 Installation manual - Page 17
17
Maytag MDG-50 Installation manual - Page 18
18
Maytag MDG-50 Installation manual - Page 19
19
Maytag MDG-50 Installation manual - Page 20
20
Maytag MDG-50 Installation manual - Page 21
21
Maytag MDG-50 Installation manual - Page 22
22
Maytag MDG-50 Installation manual - Page 23
23
Maytag MDG-50 Installation manual - Page 24
24
Maytag MDG-50 Installation manual - Page 25
25
Maytag MDG-50 Installation manual - Page 26
26
Maytag MDG-50 Installation manual - Page 27
27
Maytag MDG-50 Installation manual - Page 28
28
Maytag MDG-50 Installation manual - Page 29
29
Maytag MDG-50 Installation manual - Page 30
30
Maytag MDG-50 Installation manual - Page 31
31
Maytag MDG-50 Installation manual - Page 32
32
Maytag MDG-50 Installation manual - Page 33
33
Maytag MDG-50 Installation manual - Page 34
34
Maytag MDG-50 Installation manual - Page 35
35
Maytag MDG-50 Installation manual - Page 36
36
Maytag MDG-50 Installation manual - Page 37
37
Maytag MDG-50 Installation manual - Page 38
38
Maytag MDG-50 Installation manual - Page 39
39
Maytag MDG-50 Installation manual - Page 40
40
Maytag MDG-50 Installation manual - Page 41
41
Maytag MDG-50 Installation manual - Page 42
42
Maytag MDG-50 Installation manual - Page 43
43
Maytag MDG-50 Installation manual - Page 44
44
Maytag MDG-50 Installation manual - Page 45
45
Maytag MDG-50 Installation manual - Page 46
46
Maytag MDG-50 Installation manual - Page 47
47
Maytag MDG-50 Installation manual - Page 48
48
Maytag MDG-50 Installation manual - Page 49
49
Maytag MDG-50 Installation manual - Page 50
50
Maytag MDG-50 Installation manual - Page 51
51
Maytag MDG-50 Installation manual - Page 52
52
Maytag MDG-50 Installation manual - Page 53
53
Maytag MDG-50 Installation manual - Page 54
54
Maytag MDG-50 Installation manual - Page 55
55
26
Consistent gas pressure is essential at
ALL gas connections. It is recommended that a 3/4-inch pipe gas
loop be installed in the supply line serving a bank of dryers. An in-line pressure regulator must be installed
in the gas supply line (header) if the (natural) gas pressure exceeds 12.0 inches of water column pressure.
Refer to the illustrations on the previous page (
page 25).
NOTE: A water column test pressure of 3.5 inches for natural gas and 10.5 inches for L.P. (liquid
propane) dryers is required at the gas valve pressure tap of each dryer for proper and safe
operation.
A 1/8" N.P.T. plugged tap, accessible for a test gauge connection, must be installed in the main gas supply
line immediately upstream of each dryer.
IMPORTANT: Pipe joint compounds that resist the action of natural gas and L.P. gas must be used.
IMPORTANT: Test ALL connections for leaks by brushing on a soapy water solution (liquid
detergent works well).
WARNING: NEVER TEST FOR LEAKS WITH A FLAME!
ALL components and materials must conform to National Gas Code or Canadian Gas specifications. It is
important that gas pressure regulators meet applicable pressure requirements and that gas meters be rated
for the total amount of
ALL the appliance BTU's being supplied.
IMPORTANT: The dryer and its individual shut-off valve must be disconnected from the gas supply
piping system during any pressure testing of that system at test pressures in excess of
1/2 psig (3.5 kPa).
NOTE: The dryer must be isolated from the gas supply piping system by closing its individual manual
shut-off valve during any pressure test of the gas supply system at test pressures equal to or less
than 1/2 psig (3.5 kPa).