Maytag MEDC300BW Installation Manual
Download Installation manual of Maytag 29" WIDE Dryer for Free or View it Online on All-Guides.com. This version of Maytag 29" WIDE Manual compatible with such list of devices, as: 29" WIDE, MEDC300BW, MEDC400BW, MEDX500BW, WED4800BQ
Category: Dryer
Type: Installation manual
Model: Maytag 29" WIDE , Maytag MEDC300BW , Maytag MEDC400BW , Maytag MEDX500BW , Maytag WED4800BQ , Maytag WED4850BW , Whirlpool WED4800BQ
Pages: 20
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
9
3-wire Power Supply Cord Connection
Use where local codes permit connecting cabinet-ground
conductor to neutral wire.
A
B
D
C
E
F
G
A. 3-wire receptacle (NEMA type 10-30R)
B. 3-wire plug
C. Neutral prong
D. Spade terminals with upturned ends
E. 3/4" (19 mm) UL listed strain relief
F. Ring terminals
G. Neutral (white or center wire)
Connect remaining wires
6.
Connect remaining wires to outer terminal block screws.
Tighten screws. Finally, reinsert tab of terminal block cover
into slot of dryer rear panel. Secure cover with hold-down
screw. Now, go to Venting Requirements.
A
F
Connect ground wire (F) (green or bare) of power supply cord
to external ground conductor screw (A). Tighten screw.
5. Connect ground wire
Remove center terminal block screw (B).
B
3. Remove center screw
4-wire Power Supply Cord Connection
Remove center terminal block screw (B). Remove neutral
ground wire (E) from external ground conductor screw (A).
A
E
B
Prepare to connect neutral
ground wire and neutral wire.
3.
B
C
E
Connect neutral ground wire
and neutral wire
4.
Connect neutral ground wire (E) and neutral wire (white or
center) (C) of power supply cord under center terminal block
screw (B). Tighten screw.
IMPORTANT: A 4-wire connection is required for mobile
homes and where local codes do not permit the use of 3-wire
connections.
A
BF
E
G
D
C
A. 4-wire receptacle (NEMA type 14-30R)
B. 4-prong plug
C. Ground prong
D. Neutral prong
E. Spade terminals with upturned ends
F. 3/4" (19 mm) UL listed strain relief
G. Ring terminals