Home | About | Contact

Maytag 4396395T Installation Instructions

Download Installation instructions of Maytag 4396395P Kitchen Appliance Accessories for Free or View it Online on All-Guides.com. This version of Maytag 4396395P Manual compatible with such list of devices, as: 4396395P, 4396395T, UKF8001, UKF8001P, UKF8001T

Maytag 4396395P Installation instructions - Page 1
1
Page 1
background image

Water Filter Installation Instructions

Follow these simple instructions for your filter type.

Refrigerator Water Filter 4

1. Locate the filter door in the right side of the refrigerator ceiling.

2. Press in the tab on the filter cover door to release the door latch

3.  During initial installation of the water filter, remove the blue bypass cap located 

in the refrigerator and retain for later use. During replacement installation rotate 

the used filter counter clockwise until it is released from the filter head. Note: 

there may be some water in the filter and some spilling may occur.

4.  Remove the sealing label from the end of the filter and insert into the filter head.  

Do not tamper with the filter cap. Rotate gently clockwise until the filter stops.  

5. Lift the filter up into the compartment. Close the filter door completely.

6.  Reduce water spurts by flushing air from the system. Run water continuously 

for 4 gallons (approximately 5 minutes) through the dispenser until water runs 

steady. Additional flushing may be required in some households where water is 

of poor quality.

Part UKF8001

Phone:

US: 1-866-698-2538

Hours of operation:

Monday – Friday 8:00 AM – 8:00 PM EST