Maytag DC68-01052A Installation Manual
Download Installation manual of Maytag DC68-01052A Laundry Accessories for Free or View it Online on All-Guides.com.
Brand: Maytag
Category: Laundry Accessories
Type: Installation manual for Maytag DC68-01052A
Pages: 1
1
5.
2.
6.
1.
S TAC K ING K IT INS TAL L AT ION
1)P osition the unit on a level surface,
capable of s upporting the entire
weight of the dryer.
R emember that the unit will be
heavier when it is fully loaded.
C lean the s urface where the s tacking
kit is going to be installed.
P lace the mounting bracket on the
W as her as indicated.
2) R emove the 2 plas tic covers (s hown in figure 6) attached
to the middle of the stacking kit, and s ave thes e for
later us e. R emove the double back tape and firmly attach
the s tacking kit the top of the was her to ass ure the
proper s eal.
Make sure the word F R ONT printed on the s tacking kit
is facing forward as shown above.
3) P ut back edge of s tacking kit to back mold line of washer’s
topcoverandtightenthescrew.
5) Y our Dryer is equipped with 4 leveling legs .
Make sure they are lowered 10 mm, s o there is a
gap between the legs and the dryer bas e.
6) G ently push the dryer into pos ition as
indicated in figure 5 & 6, s liding the unit into
the slots provided.
It is important that the dryer is level.
Make s ure all four leveling legs are pushed
all the way back into the s lots to ensure
proper mounting.
3.
6.
4) Ins tall all 7 s crews provided with a power drill
and tighten the stacking kit to the unit bas e s ecurely.
4.
8.
DC 68-01052A
7) Ins ert the plastic covers
(removed in section 2)
covering the two front
slots of the leveling legs .
Depending upon the
location of the unit, it may
be neces s ary to change
the s ide on which the dryer
door opens.
7.
( back )