• Home
• Brands
• Maytag Manuals
• Maytag 30” BUILT-INMICROWAVE OVEN COMBINATION
• Maytag 30” BUILT-INMICROWAVE OVEN COMBINATION Installation Instructions Manual

Maytag 30” BUILT-INMICROWAVE OVEN COMBINATION Installation Instructions Manual

Download Installation instructions manual of Maytag 30” BUILT-INMICROWAVE OVEN COMBINATION Microwave Oven for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

Electrical ground is required on this appliance.

This appliance is equipped with copper lead wires.

If connection is made to aluminum house wiring, use

only special connectors which are approved for join-

ing copper and aluminum wires in accordance with the

National Electrical Code and local codes and or-

dinances. This appliance is manufactured with a white

neutral power supply wire and a frame connected green

ground wire twisted together.

If local codes permit connection of the frame

grounding conductor to the neutral (white) wire, con-

nect the green and white wire from the supply cable

of the appliance together and the neutral (white) wire

in the junction box. Connect the remaining wires from

the supply cable to the wires in the junction box. See

Figure 3.

If local codes DO NOT permit frame grounding to the

neutral, separate the white and green wires that extend

out of the end of the supply cable of the appliance. See

Figure 5. Connect the white wire from the supply cable

to the neutral wire in the junction box. Connect the

black and red wires from the supply cable, to the cor-

responding wires in the junction box. The green wire

must now be used to ground the appliance in accord

ante with local electrical codes. Connect the green

colored copper ground wire to a grounded cold water

pipe* (see Figure 4) or to the grounded lead in the ser-

vice panel.

Do not ground to a gas supply pipe. Do not connect

to electric power supply until appliance is permanent-

ly grounded. Connect the ground wire before turning

on the power. (See Figure 4.)

CAUTION - If connecting to a four-wire electrical

system (MOBILE HOME) the appliance frame

MUST NOT be connected to the neutral wire of

the four-wire electrical system. Separate the white

and green wires that extend out of the supply

cable of the appliance. Connect the white, red and

black wires from the supply cable to the cor-

responding wires in the junction box. Connect the

green wire from the supply cable to the ground

wire in the junction box. (See Figure 5.)

‘Cold wa!er pipe must have metal continuity to electrIcal ground and should

not be Interrupted by plastic, rubber or other electrlcally lnsulallng connec-

tors (Including water meter or pump) without addlng a jumper wfre al those

connectors

0

A Check operation

A. Microwave oven

Refer to Use and Care Guide for details.

B. Oven elements

BAKE - Set selector switch on BAKE. Turn thermostat

to 3500 BAKE. The bottom element should glow red and

indicator light should be on. The upper element should

become hot but NOT glow red.

BROIL - Set selector switch on BROIL. Turn ther-

mostat to high. The top element should glow red and

indicator light should be on.

C. Rotisserie

(if optional rotisserie kit is

installed)

Place straight oven rack on bottom ledge position

Place broiler pan on oven rack.

Place special rotisserie rack on broiler pan. Position

the spit bar on this special rack.

Rotation should start when spit bar is ,inserted into

receptacle in back of oven.

D. Clock

Refer to operating instructions in the Use and Care

Guide (packed in the oven).

E. Cleaning

See the Use and Care Guide (packed in the oven) for

proper care and cleaning instructions.

6