Maytag MMV5208WS Installation Instructions Manual

Download Installation instructions manual of Maytag MMV1164WW Microwave Oven for Free or View it Online on All-Guides.com.

Maytag MMV1164WW Installation instructions manual - Page 1
1
Maytag MMV1164WW Installation instructions manual - Page 2
2
Maytag MMV1164WW Installation instructions manual - Page 3
3
Maytag MMV1164WW Installation instructions manual - Page 4
4
Maytag MMV1164WW Installation instructions manual - Page 5
5
Maytag MMV1164WW Installation instructions manual - Page 6
6
Maytag MMV1164WW Installation instructions manual - Page 7
7
Maytag MMV1164WW Installation instructions manual - Page 8
8
Maytag MMV1164WW Installation instructions manual - Page 9
9
Maytag MMV1164WW Installation instructions manual - Page 10
10
Maytag MMV1164WW Installation instructions manual - Page 11
11
Maytag MMV1164WW Installation instructions manual - Page 12
12
4
INSTALLATION INSTRUCTIONS
Remove Mounting Plate
Depending on your model, the mounting plate may be in the foam
packaging, or it may be attached to the back of the microwave
oven.
NOTE: To avoid possible damage to the work surface, cover the
work surface.
1. Remove any remaining contents from the microwave oven
cavity.
2. If the mounting plate is attached to the back of the microwave
oven, remove it and set it aside.
3. Tape the microwave oven door closed so that door does not
swing open while the microwave oven is being handled.
NOTE: To avoid damage to the microwave oven, do not grip or
use the door or door handle while the microwave oven is being
handled.
Rotate Blower Motor
The microwave oven is set for recirculation installation. For wall or
roof venting, changes must be made to the venting system.
NOTE: Skip this section if you are using recirculation installation.
Keep the damper assembly in case the venting method is
changed, or the microwave oven is reinstalled in another location
where wall or roof venting may be used.
Wall Venting Installation Only
1. Remove screws attaching damper plate to top of microwave
oven exterior. Slide damper plate toward the front of the
microwave oven and lift up.
2. Keep damper plate and screws together and set aside.
3. Remove 2 screws attaching blower motor to back of
microwave oven.
4. Lift blower motor out of microwave oven.
5. Rotate blower motor 180° so that exhaust ports face the back
of microwave oven, and lower blower motor back into the
microwave oven.
6. Reattach blower motor to back of microwave oven with
2 screws removed in Step 3.
AScrews
B. Damper plate
A
B
A. Screws (in recessed holes)
A. Blower motor
A. Exhaust port
A
A
A