Maytag 12591308 Owner's Manual

Download Owner's manual of Maytag 12591308 Refrigerator for Free or View it Online on All-Guides.com.

Brand: Maytag

Category: Refrigerator

Type: Owner's manual for Maytag 12591308

Pages: 25

Download Maytag 12591308 Owner's manual

Maytag 12591308 Owner's manual - Page 1
1
Maytag 12591308 Owner's manual - Page 2
2
Maytag 12591308 Owner's manual - Page 3
3
Maytag 12591308 Owner's manual - Page 4
4
Maytag 12591308 Owner's manual - Page 5
5
Maytag 12591308 Owner's manual - Page 6
6
Maytag 12591308 Owner's manual - Page 7
7
Maytag 12591308 Owner's manual - Page 8
8
Maytag 12591308 Owner's manual - Page 9
9
Maytag 12591308 Owner's manual - Page 10
10
Maytag 12591308 Owner's manual - Page 11
11
Maytag 12591308 Owner's manual - Page 12
12
Maytag 12591308 Owner's manual - Page 13
13
Maytag 12591308 Owner's manual - Page 14
14
Maytag 12591308 Owner's manual - Page 15
15
Maytag 12591308 Owner's manual - Page 16
16
Maytag 12591308 Owner's manual - Page 17
17
Maytag 12591308 Owner's manual - Page 18
18
Maytag 12591308 Owner's manual - Page 19
19
Maytag 12591308 Owner's manual - Page 20
20
Maytag 12591308 Owner's manual - Page 21
21
Maytag 12591308 Owner's manual - Page 22
22
Maytag 12591308 Owner's manual - Page 23
23
Maytag 12591308 Owner's manual - Page 24
24
Maytag 12591308 Owner's manual - Page 25
25
20
Hints and Care
WARNING
!
To avoid electrical shock which can cause severe personal injury or death,
disconnect power to refrigerator before replacing light bulb. If unable to
disconnet power by unplugging power cord then remove the fuse at mains.
After replacing light bulb, connect power.
CAUTION
!
To avoid personal injury or property damage, observe the following:
Allow light bulb to cool.
Wear gloves when replacing light bulb.
How to Remove and Replace Light Bulbs
Ice ’N Water dispenser
1. Locate light bulb inside top edge of dispenser frame. Unscrew to remove.
2. Replace bulbs with a 230/240VAC bulb no greater than 12 watts. Extra
light bulbs are provided in crisper due to local unavailability.
Dispensing model freezer section
1. Remove ice bin by lifting front of bin and pulling out.
2. Remove light bulb cover by pinching top tab (A) and
pulling cover out of liner.
3. Replace with appliance bulbs, type Krypton E27,
no greater than 25 watts.
4. Insert bottom tab (B) of light cover into liner and snap
top portion over light assembly.
5. Replace ice bin by sliding in until bin locks into place.
A
B
A
B
Lower fresh food section and
Non-dispensing model freezer section
1. Pinch bottom tabs (A) on light cover and pull straight
out.
2. Remove light bulb.
3. Replace with appliance bulbs, type Krypton E27,
no greater than 25 watts.
4. Insert top tabs (B) of light cover into refrigerator liner and
snap bottom portion over light assembly.
Upper fresh food section
1. Locate finger gaps on each side of clear light
shield. Insert fingers and press in on each side
of shield. Pull shield down and remove.
2. Remove light bulbs.
3. Replace with appliance bulbs, type Krypton E27,
no greater than 25 watts.
4. Replace light bulb cover by inserting front tabs of
light shield into holes in liner directly in front of light assembly.
5. Snap back of light cover into place.