Maytag Agility User Manual
Download Operation & user’s manual of Maytag Agility Vacuum Cleaner for Free or View it Online on All-Guides.com.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
*MAYTAG and are registered trademarks
1-05 F6212901 Printed in USA 56518181
Basic steps for cleaning
✔
✔
✔
✔
✔
✔
✔
✔
Vacuum carpet thoroughly to remove loose dirt.
Test detergent for colorfastness on a hidden area of carpet or upholstery.
Pretreat spots, stains and high traffic areas with MAYTAG Spot and Stain Spray. Blot spots or
stains to remove as much of the spot as possible.
Fill solution tank with hot tap water and proper amount of MAYTAG detergent.
Use only MAYTAG brand detergents in your deep cleaner. Other brands may damage the
cleaner.
Clean the carpet or upholstery.
• Squeeze and hold trigger. Move cleaner forward and back.
• Release trigger and go over same area to pick up dirty solution. Use additional dry strokes
to remove more dirty solution.
• Tough spots and stains may need additional treatment with Spot and Stain Spray.
Listen carefully! When the motor sound rises in pitch or changes, the recovery tank needs to be
emptied.
When the recovery tank is full, the cleaner will no longer pick up dirty solution.
Allow time for the carpet or upholstery to dry. Avoid walking on carpet or using upholstery
until it is completely dry.
When carpet and/or upholstery are dry, vacuum one more time.