Maytag MHN30PDBGW Installation Instructions Manual

Download Installation instructions manual of Maytag MHN30PDBGW Vacuum Cleaner, Washer for Free or View it Online on All-Guides.com.

Brand: Maytag

Category: Vacuum Cleaner , Washer

Type: Installation instructions manual

Model: Maytag MHN30PDBGW , Maytag MHN30PNBGW

Pages: 36

Download Maytag MHN30PDBGW Installation instructions manual

Maytag MHN30PDBGW Installation instructions manual - Page 1
1
Maytag MHN30PDBGW Installation instructions manual - Page 2
2
Maytag MHN30PDBGW Installation instructions manual - Page 3
3
Maytag MHN30PDBGW Installation instructions manual - Page 4
4
Maytag MHN30PDBGW Installation instructions manual - Page 5
5
Maytag MHN30PDBGW Installation instructions manual - Page 6
6
Maytag MHN30PDBGW Installation instructions manual - Page 7
7
Maytag MHN30PDBGW Installation instructions manual - Page 8
8
Maytag MHN30PDBGW Installation instructions manual - Page 9
9
Maytag MHN30PDBGW Installation instructions manual - Page 10
10
Maytag MHN30PDBGW Installation instructions manual - Page 11
11
Maytag MHN30PDBGW Installation instructions manual - Page 12
12
Maytag MHN30PDBGW Installation instructions manual - Page 13
13
Maytag MHN30PDBGW Installation instructions manual - Page 14
14
Maytag MHN30PDBGW Installation instructions manual - Page 15
15
Maytag MHN30PDBGW Installation instructions manual - Page 16
16
Maytag MHN30PDBGW Installation instructions manual - Page 17
17
Maytag MHN30PDBGW Installation instructions manual - Page 18
18
Maytag MHN30PDBGW Installation instructions manual - Page 19
19
Maytag MHN30PDBGW Installation instructions manual - Page 20
20
Maytag MHN30PDBGW Installation instructions manual - Page 21
21
Maytag MHN30PDBGW Installation instructions manual - Page 22
22
Maytag MHN30PDBGW Installation instructions manual - Page 23
23
Maytag MHN30PDBGW Installation instructions manual - Page 24
24
Maytag MHN30PDBGW Installation instructions manual - Page 25
25
Maytag MHN30PDBGW Installation instructions manual - Page 26
26
Maytag MHN30PDBGW Installation instructions manual - Page 27
27
Maytag MHN30PDBGW Installation instructions manual - Page 28
28
Maytag MHN30PDBGW Installation instructions manual - Page 29
29
Maytag MHN30PDBGW Installation instructions manual - Page 30
30
Maytag MHN30PDBGW Installation instructions manual - Page 31
31
Maytag MHN30PDBGW Installation instructions manual - Page 32
32
Maytag MHN30PDBGW Installation instructions manual - Page 33
33
Maytag MHN30PDBGW Installation instructions manual - Page 34
34
Maytag MHN30PDBGW Installation instructions manual - Page 35
35
Maytag MHN30PDBGW Installation instructions manual - Page 36
36
INSTALLATIONINSTRUCTIONS
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
Max. packed weight:
PD model: 115 kg (253.53 Ib)
PN model: 111 kg (244.71 Ib)
Max. unpacked weight:
PD model: 111 kg (244.71 Ib)
PN model: 107 kg (235.89 Ib)
iMPORTANT: Position the washer so that the rear of the washer
is within approximately 900 mm (3 ft.) of its final location.
There are 4 shipping bolts in the rear panel of the washer that
support the suspension system during transportation. These bolts
also retain the power cord inside the washer until the bolts are
removed.
1. Keep the washer in the upright position while removing the
shipping bolts.
Shipping bolt
Shipping bolt with plastic spacer
2. Using a 1/2" wrench, loosen each of the bolts.
3. Once the bolt is loose, move it to the center of the hole
and completely pull out the bolt, including the plastic spacer
covering the bolt.
4. Once all 4 bolts are removed, discard the bolts and spacers.
Then push the plug back into the back of the washer and pull
the power cord through the left opening of the rear panel and
close the hole with the attached cap.
5. Close the bolt holes with the 4 transport bolt hole plugs.
NOTE: If the washer is to be transported at a later date, call your
product distributor or installer. To avoid suspension and structural
damage, your washer must be properly set up for relocation by a
trained professional.
1. Select the plug that fits with the electric receptacle.
2. Assemble the plug into the end of the power cord.
3. Secure the power cord by seating the connection on the cord
lock.
m
4. Place the cord lock cover and push until it snaps.
5. Make sure the power cord connection is seated on the cord
lock and that the cord lock clamps correctly.
7