Maytag LI3VQA Installation Instructions And Use And Care Manual

Download Installation instructions and use and care manual of Maytag LI3VQA Ventilation Hood for Free or View it Online on All-Guides.com.

Brand: Maytag

Category: Ventilation Hood

Type: Installation instructions and use and care manual

Model: Maytag LI3VQA , Maytag W10274302B

Pages: 28

Download Maytag LI3VQA Installation instructions and use and care manual

Maytag LI3VQA Installation instructions and use and care manual - Page 1
1
Maytag LI3VQA Installation instructions and use and care manual - Page 2
2
Maytag LI3VQA Installation instructions and use and care manual - Page 3
3
Maytag LI3VQA Installation instructions and use and care manual - Page 4
4
Maytag LI3VQA Installation instructions and use and care manual - Page 5
5
Maytag LI3VQA Installation instructions and use and care manual - Page 6
6
Maytag LI3VQA Installation instructions and use and care manual - Page 7
7
Maytag LI3VQA Installation instructions and use and care manual - Page 8
8
Maytag LI3VQA Installation instructions and use and care manual - Page 9
9
Maytag LI3VQA Installation instructions and use and care manual - Page 10
10
Maytag LI3VQA Installation instructions and use and care manual - Page 11
11
Maytag LI3VQA Installation instructions and use and care manual - Page 12
12
Maytag LI3VQA Installation instructions and use and care manual - Page 13
13
Maytag LI3VQA Installation instructions and use and care manual - Page 14
14
Maytag LI3VQA Installation instructions and use and care manual - Page 15
15
Maytag LI3VQA Installation instructions and use and care manual - Page 16
16
Maytag LI3VQA Installation instructions and use and care manual - Page 17
17
Maytag LI3VQA Installation instructions and use and care manual - Page 18
18
Maytag LI3VQA Installation instructions and use and care manual - Page 19
19
Maytag LI3VQA Installation instructions and use and care manual - Page 20
20
Maytag LI3VQA Installation instructions and use and care manual - Page 21
21
Maytag LI3VQA Installation instructions and use and care manual - Page 22
22
Maytag LI3VQA Installation instructions and use and care manual - Page 23
23
Maytag LI3VQA Installation instructions and use and care manual - Page 24
24
Maytag LI3VQA Installation instructions and use and care manual - Page 25
25
Maytag LI3VQA Installation instructions and use and care manual - Page 26
26
Maytag LI3VQA Installation instructions and use and care manual - Page 27
27
Maytag LI3VQA Installation instructions and use and care manual - Page 28
28
11
Range Hood Controls
Operating the light
The On/Off light button controls both lights. Press once for On
and again for Off.
Operating the blower
The BLOWER SPEED buttons turn the blower on and control the
blower speed and sound level for quiet operation. The speed can
be changed anytime during fan operation by pressing the desired
blower speed button.
The BLOWER OFF button turns the blower Off.
RANGE HOOD CARE
Cleaning
IMPORTANT: Clean the hood and grease filters frequently
according to the following instructions. Replace grease filters
before operating hood.
Exterior Surfaces:
To avoid damage to the exterior surface, do not use steel wool or
soap-filled scouring pads.
Always wipe dry to avoid water marks.
Cleaning Method:
Liquid detergent soap and water, or all-purpose cleanser
Wipe with damp soft cloth or nonabrasive sponge, then rinse
with clean water and wipe dry.
Metal Grease Filter:
1. Remove each filter by pulling the spring release handle and
then pulling down the filter.
2. Wash metal filters as needed in dishwasher or hot detergent
solution.
3. Reinstall the filter by making sure the spring release handles
are toward the front. Insert aluminum filter into upper track.
4. Push in spring release handle.
5. Push up on metal filter and release handle to latch into place.
6. Repeat steps 1-5 for the other filter.
Non-Vented (recirculating) Installation Filters:
The charcoal filter is not washable. It should last up to six months
with normal use. Replace with Charcoal Filter Kit Number
W10272068.
To replace charcoal filter:
1. Cover the grill that protects the blower motor with the
charcoal filter so that the slots on the filter correspond to the
pins on the sides of the motor protection grill.
2. Turn the charcoal filter clockwise to lock it.
3. Repeat steps 1-2 on the other filter.
Replacing a Halogen Lamp
Turn off the range hood and allow the halogen lamp to cool. To
avoid damage or decreasing the life of the new bulb, do not
touch bulb with bare fingers. Replace bulb, using tissue or
wearing cotton gloves to handle bulb.
If new lamps do not operate, make sure the lamps are inserted
correctly before calling service.
1. Disconnect power.
2. Push up on the lens and turn it counterclockwise.
3. Remove the bulb and replace it with a 120-volt, 50-watt
maximum halogen bulb with a GU10 base. Turn it clockwise
to lock it into place.
4. Repeat steps 2-3 for the other bulb if needed.
5. Reconnect power.
A. On/Off light button
B. Blower Off button
C. Blower speed minimum button
D. Blower speed medium button
E. Blower speed maximum button
A. Spring release handle
A
B
C
D
E
A
A. Charcoal filter
B. Pins
C. Blower motor
A
B
C