Maytag 2000 Series Use & Care Manual

Download Use & care manual of Maytag 2000 Series Washer, Washer/Dryer for Free or View it Online on All-Guides.com.

Brand: Maytag

Category: Washer , Washer/Dryer

Type: Use & care manual for Maytag 2000 Series

Pages: 26

Download Maytag 2000 Series Use & care manual

Maytag 2000 Series Use & care manual - Page 1
1
Maytag 2000 Series Use & care manual - Page 2
2
Maytag 2000 Series Use & care manual - Page 3
3
Maytag 2000 Series Use & care manual - Page 4
4
Maytag 2000 Series Use & care manual - Page 5
5
Maytag 2000 Series Use & care manual - Page 6
6
Maytag 2000 Series Use & care manual - Page 7
7
Maytag 2000 Series Use & care manual - Page 8
8
Maytag 2000 Series Use & care manual - Page 9
9
Maytag 2000 Series Use & care manual - Page 10
10
Maytag 2000 Series Use & care manual - Page 11
11
Maytag 2000 Series Use & care manual - Page 12
12
Maytag 2000 Series Use & care manual - Page 13
13
Maytag 2000 Series Use & care manual - Page 14
14
Maytag 2000 Series Use & care manual - Page 15
15
Maytag 2000 Series Use & care manual - Page 16
16
Maytag 2000 Series Use & care manual - Page 17
17
Maytag 2000 Series Use & care manual - Page 18
18
Maytag 2000 Series Use & care manual - Page 19
19
Maytag 2000 Series Use & care manual - Page 20
20
Maytag 2000 Series Use & care manual - Page 21
21
Maytag 2000 Series Use & care manual - Page 22
22
Maytag 2000 Series Use & care manual - Page 23
23
Maytag 2000 Series Use & care manual - Page 24
24
Maytag 2000 Series Use & care manual - Page 25
25
Maytag 2000 Series Use & care manual - Page 26
26
9
Connect the inlet hoses to the washer
IMPORTANT: Make sure that the flat washers have been placed into
the hose couplings.
C H
C. Cold water inlet
H. Hot water inlet
1. Attach the hot water hose to the washer’s hot (H) water inlet
valve. Screw on coupling by hand until it is seated on the
washer.
2. Attac
h the cold water hose to the washer’s cold (C) water faucet.
Screw on coupling by hand until it is seated on the washer.
3. Using pliers, t
ighten the couplings with an additional !
two-thirds turn.
NOTE: D
o not overtighten or use tape or sealants on the valve.
Damage to the valves can result.
4. T
urn on the water faucets completely and check for leaks.
NOTE: Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Record hose installation or replacement dates on
the hoses for future reference.
Periodically inspect and replace hoses if
bulges, kinks, cuts,
wear, or leaks are found.
Connect the Drain Hose
Remove drain hose from washer drum
1. Use locking pliers, squeeze hose clamp tabs together and insert
over the end of drain hose.
2. Slide drain hose onto washer connection.
3. Once drain hose is in place, release pliers.
4. Washer drain system can be installed using a floor drain, wall
standpipe, floor standpipe, or laundry tub.
Laundry tub drain or standpipe drain
A B
Connect the drain hose form to the
corrugated drain hose.
A. Snap either end of the drain hose form to the drain hose at the point where
the corrugation begins.
B. Bend drain hose over drain hose form and snap into place.
To keep drain water from going back into the washer:
Use the drain hose form, and do not force excess drain hose into
standpipe. Hose should be secure, but loose enough to provide
a gap for air.
Do not lay excess hose on the bottom of the laundry tub.
Floor drain
You may need additional parts. See Floor drain under “Tools and
Parts.