Maytag 27" Troubleshooting Manual
Download Troubleshooting manual of Maytag 27" Washer for Free or View it Online on All-Guides.com.
6
#
IN
Test or Display
Press LED to Start
Press LED to Cancel
Hold Quick
Spin Step
(holds
predefined
RPM)
Press Rotary Selector (during test) Press Rotary Selector (cancels
hold & resumes next step)
Fast
Time-
Down /
Advance to
Next Step
Press Temperature to start test. Press
Temperature during cycle to advance.
Press Power Off
Quick
Service
Cycle
Press Temperature and Soil Level Press Off (also exits Service Mode)
Hold Quick
Service Cycle
Step
Press Rinse&Spin and Spin Only
together
Press Rinse&Spin and Spin Only
to resume
LED/Switch
Test
Press Delay for 3 seconds (then
individual buttons to test) Rotate Cycle
Selector clockwise, the LED’s around it
will be toggled. Rotate
counterclockwise, the7-segment LED’s
toggle. Press Rotary Cycle Selector, all
of the LED’s around the Rotary Cycle
Selector will be toggled.
Press Off twice after starting test
Board
Input
Test
Press Spin Only Press Spin Only
Board
Output
Test /
System Check
Press Spin Speed Press Off
Diagnostic
Code Display
(Initial)
Press Rinse& Spin – displays “d” Press Rinse&Spin again
All Diagnostic
Codes
Rotate Cycle Selector either direction N/A
Cycle Count
No. for
Diagnostic
Code
Press and hold Rotary Selector, while
diagnostic code is displayed
Release Rotary Selector (returns
to diagnostic code display)