• Home
• Brands
• Maytag Manuals
• Maytag MVWC7ES
• Maytag MVWC7ESWW User Instructions

Maytag MVWC7ESWW User Instructions

Download User instructions of Maytag MVWC7ES Washer for Free or View it Online on All-Guides.com. This version of Maytag MVWC7ES Manual compatible with such list of devices, as: MVWC7ES, MVWC7ESWW, W10240518A, W10240530A-SP

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

7

6. Select Temperature and Soil Level Option.

7. Select Extra Rinse Option, if desired.

9. Start the washer by pulling out the Cycle control knob.

NOTE: For best water savings, avoid stopping the washer,

however if the washer does need to be stopped:

To stop at any time, push in the Cycle Control knob. 

To restart, close the lid and pull out the Cycle Control knob. 

WASHER CARE

Cleaning Your Washer

Use a soft, damp cloth or sponge to wipe up any spills such as

detergent or bleach from the outside of your washer.

Clean your washer interior by mixing 1 cup (250 mL) of chlorine

bleach and enough detergent to equal twice the manufacturer’s

recommended amount for a normal wash load. Pour this mixture

into your washer and run it through a complete cycle using hot

water. Repeat this process if necessary.

Remove any hard water deposits using only cleaners labeled as

washer safe.

Cleaning the liquid fabric softener dispenser

1. Remove dispenser by grasping top with both hands and

squeezing, while pushing upward with thumbs.

2. Rinse dispenser under warm water, then replace it.

NOTE: To avoid damage to the washer or clothing, do not wash

clothes with the liquid fabric softener dispenser removed.

Water Inlet Hoses

This washer does not include water inlet hoses. The use of

factory specied parts is recommended. See "Accessories" for

a list of factory specied hoses available for separate purchase.

These hoses are manufactured and tested to meet factory

specications.

Replace inlet hoses after 5 years of use to reduce the risk of hose

failure. Periodically inspect and replace inlet hoses if bulges,

kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, mark the date of replacement

on the label with a permanent marker.

Moving and Storage

Because some water may stay in the hoses, freezing can damage

your washer. If storing or moving your washer during freezing

weather, winterize it.

Winterizing your washer

1. Shut off both water faucets. Disconnect and drain water inlet

hoses. Pour 1 qt (1 L) of R.V.-type antifreeze into the basket.

2. Run washer on a drain and spin setting for about 30 seconds

to mix the antifreeze and remaining water.

3. Unplug washer or disconnect power.

To use washer again

1. Flush water pipes and hoses. Reconnect water inlet hoses.

Turn on both water faucets.

2. Plug in washer or reconnect power.

3. Run the washer through a complete bulky items cycle with

1 cup (250 mL) of detergent to clean out antifreeze.

Storage, non-use, or vacation care

Operate your washer only when you are at home. If you will be on

vacation or not using your washer for an extended period of time,

you should:

1. Unplug washer or disconnect power.

2. Turn off the water supply to the washer. This helps avoid

ooding (due to a water pressure surge) while you are away.

8. To select cycle, push the Cycle Control knob in and turn

clockwise to the cycle you want.