• Home
• Brands
• Maytag Manuals
• Maytag HE21250PC
• Maytag HE21250PC User's Manual

Maytag HE21250PC User's Manual

Download Operation & user’s manual of Maytag HE21250PC Water Heater for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

Instructions for Installation (cont'd)

SelectingThermostatLocation(cont'd)

22. Guide the end of the remote thermostat cable through the 25. Carefully press the terminal connector and connected wires

hole where the black plug was removed in the left junction down into the water heater junction box.

box cover.

26. A strain-relief bushing is also provided in the small bag that

X REMOTE contained the terminal connector. Open the bushing and

HERMOSTAT place it around the remote thermostat cable exiting the junc-

CABLE

tion box. Press the bushing into the hole in the left junction

box cover,

INSULATING

REMOTE STRAIN-RELIEF

THERMOSTAT BUSHING

TERMINAL

CONNECTOR

23. Strip the end of the remote thermostat cable outer insulation

back 11/4inches. Strip the ends 1/4inch on each of the six col-

ored wires.

m ua _.250"

b- t- u_

"_ _ _" _ 27. Replace the right junction box cover using the screw provid-

_t it !_ !t !t _t_SO" heater,ed'This completes the remote thermostat wiring at the water

28. Locate the 6 inches of remote thermostat cable protruding

24. Loosen each screw in the terminal connector one at a time through the wall opening (from Step 8). Using the wall plate

and insert wire with the same color insulatlon into each removed in Step 11, pull the cable through opening near cen-

nmnbered slot. Tighten each screw securely making sure ter of wall plate.

both wires in each slot are tight.

TERMINAL

REMOTE _ff CONNECTOR

THERMOSTAT /_Y_vt-J- THERMOSTAT \ _TH'ER'MOSI"AT -_

CABLEfJ--/ CABLEFROM CABLE

_/ _ WATER HEATER

r _ _ j

20