• Home
• Brands
• Maytag Manuals
• Maytag MWF4100AWS
• Maytag MWF4100AWS Operation And Maintenance Manual

Maytag MWF4100AWS Operation And Maintenance Manual

Download Operation and maintenance manual of Maytag MWF4100AWS Water System for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

MAYTAG Whole Home Water Filtration System Owners Manual MA1-5

November 2003

4

Operational Safety

• The MAYTAG Whole Home Water Filtration System is under pressure during use and

precautions must be taken.

• This device is designed to operate on a 120VAC/15 Amp/ 60Hz line. Do not modify the plug

on the power cord. If the plug does not fit the electrical outlet, have a proper outlet installed

by a qualified electrician.

• To avoid System damage: Ensure that a Stainless Steel Prefilter or Carbon Prefilter is in place

during operation of the System. In the absence of an Internal Prefilter, abrasive damage to the

System may occur. A damaged System may permit contaminated water to enter the household

distribution system causing illness. Irreversible and premature fouling of the System may also

occur resulting in System replacement at the owner’s expense.

Service and Maintenance Safety

• To avoid electric shock: Disconnect the AC power from the MAYTAG Whole Home Water

Filtration System before servicing the controller; do not remove the controller cover while

System is in use. Only MAYTAG Services Qualified Service Technicians should attempt to

service the controller.

• Important: The MAYTAG Whole Home Water Filtration System must be kept in a wetted

condition. Once installed or during service and maintenance activities, do not allow the

System to sit completely drained for extended periods (greater than 12 hours). Failure to do

so may damage the System and cause contaminated water to enter the household.