Mitsubishi DLP FD730U Manual
Download Manual of Mitsubishi WD620U Accessory, Projector for Free or View it Online on All-Guides.com. This version of Mitsubishi WD620U Manual compatible with such list of devices, as: WD620U, WD620U-G, XD600U, XD600U-G, FL7000U
Brand: Mitsubishi
Category: Accessory , Projector
Type: Manual
Model: Mitsubishi WD620U , Mitsubishi WD620U-G , Mitsubishi XD600U , Mitsubishi XD600U-G , Mitsubishi DLP FD730U , Mitsubishi DLP FD730U-G , Mitsubishi FD630U , Mitsubishi FD630U-G , Mitsubishi FL7000U
Pages: 11
1
2
3
4
5
6
7
8
9
10
11
1
DLP Projector
FD730U/FD730U-G
Controlling the projector using a personal computer
This projector can be controlled by connecting a personal computer with RS-232C terminal.
PC-controllable functions:
• Turning the power ON or OFF
• Changing input signals
• Inputting commands by pressing the buttons on the control panel and remote control
• Menu setting
Connection
Important:
• Connect the computer with the projector on a one-to-one basis.
• Make sure that your computer and projector are turned off before connection.
• Boot up the computer first, and then plug the power cord of the projector.
(If you do not follow this instruction, the Com port may not function.)
• Adapters may be necessary depending on the PC connected to this projector. Contact your dealer for details.
1. Interface
1.1 Pin assignment of SERIAL terminal (D-SUB 9-pin)
1.2 Communications format
This projector uses RXD, TXD and GND lines for RS-232C control.
PROTOCOL RS-232C
BAUD RATE 9600 [bps]
DATA LENGTH 8 [bits]
PARITY BIT NONE
STOP BIT 1 [bit]
FLOW CONTROL NONE
RS-232C
terminal
D-SUB 9-pin
D-SUB 9-pin
RS-232C cable
SERIAL
123 4 5
6789
Pin Description Pin Description
1 NC 2 RXD
3 TXD 4 NC
5 GND 6 NC
7 RTS 8 CTS
9 NC