Mitsubishi NetCommand Users Manual
Download Operation & user’s manual of Mitsubishi NetCommand Remote Control for Free or View it Online on All-Guides.com.
Brand: Mitsubishi
Category: Remote Control
Type: Operation & user’s manual for Mitsubishi NetCommand
Pages: 4
1
2
3
4
Welcome to NetCommand
NetCommand® is an intelligent control system that
makes your Mitsubishi TV the heart of your home
theater. With NetCommand, the TV sends signals to
the other devices in the system via the IR emitters,
telling the devices to play, record, change inputs, adjust
volume, change channels and many more functions. All
of this is accomplished with the TV’s remote control.
IR Learning and IEEE 1394 Support
The “IR Learning” feature of NetCommand allows the
TV to learn the remote control signals for new devices
that the TV is not already preprogrammed to operate.
NetCommand® also includes the ability to control IEEE
1394 devices by sending control signals on a FireWire®
cable.
Using NetCommand is completely optional
When you first turn on the TV, the NetCommand
Setup Wizard launches. Quit the Setup Wizard if you
would rather set up Netcommand later or not use
NetCommand at all.
Setting Up NetCommand
To set up NetCommand, you select the devices
connected to your TV that you want NetCommand to
control.
To set up NetCommand when you turn on your TV
for the first time:
• When you turn on your Mitsubishi TV for the first
time, a Setup screen opens.
• Follow the on-screen instructions and steps 3–4
below.
To set up NetCommand at any other time:
1. Press TV MENU to open the main TV menu.
2. Select the NetCommand icon and press ENTER,
then select Initial and press ENTER.
3. Press ADJUST or to highlight a device type
(A/V receiver, cable box, satellite receiver, VCR, DVD
player, camcorder, PC).
4. To select the manufacturer and model for each
device type, press ADJUST or .
• For each device type, if the manufacturer and
model are not listed, select Other.
• For every device type you do not intend to
connect to your TV, select None.
Exception: If a camcorder or PC is connected,
press ENTER to select it. Press ENTER again to
deselect camcorder or PC.
NetCommand® Basics
5. After you have chosen all device types, select
Next >. You can now choose to set up TV Guide
On Screen® before finalizing your choices in the
Review screen.
Device Setup screen
Managing Your Home Theater
Use the Edit NetCommand screen to add new devices,
change device settings and connections, delete
devices, and use the “Learn” feature for remote control
signals not already in memory. On-screen instructions
guide you through each step. Your choices are:
Add: Add a new device to the NetCommand setup.
Change: Change the brand/model or input
connections of a device already listed. “Learn” the
remote control signals of devices listed as “Other”
brands.
Guide: Activate/deactivate TV Guide On Screen®,
change ZIP code, add or change TV Guide On Screen
input selections.
Review: View a list of all devices and input
connections in the NetCommand home theater
configuration. Turn unused TV inputs or devices on/off.
Delete: Remove a device or erase the NetCommand
home-theater configuration.
Initial: Start setup at the beginning. This option is only
available after deleting the complete configuration or
if NetCommand was not set up when the TV was first
powered on.
Adding IEEE 1394 Devices
Compatible IEEE-1394 devices are automatically
detected by the TV. Connect the IEEE-1394 device to
the network and power it on. A series of screens will
guide you through the setup process. See your TV
Owner’s Guide for detailed information.
Quick Reference Guide