Netgear GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual
Download Operation & user’s manual of NETGEAR GSM7228PS Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: NETGEAR
Category: Network Router , Switch
Type: Operation & user’s manual
Model: NETGEAR GSM7228PS , NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch
Pages: 628
274 | Chapter 4. Routing
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Stub Area Configuration
To display the Stub Area Configuration page, click Routing OSPF Advanced Stub Area
Configuration.
1. Use Area ID to enter the OSPF area ID. An Area ID is a 32-bit integer in dotted decimal
format that uniquely identifies the area to which a router interface connects.
2. Use Import Summary LSAs to select enable or disable. If you select enable, summary
LSAs will be imported into stub areas.
3. Use Default Cost to enter the metric value you want applied for the default route advertised
into the stub area. Valid values range from 1 to 16,777,215.
4. Click ADD to configure the area as a stub area.
5. Click DELETE to delete the stub area designation. The area will be returned to normal state.