Netgear GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual
Download Operation & user’s manual of NETGEAR GSM7228PS Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: NETGEAR
Category: Network Router , Switch
Type: Operation & user’s manual
Model: NETGEAR GSM7228PS , NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch
Pages: 628
Chapter 4. Routing | 279
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Interface Configuration
Use the OSPF Interface Configuration page to configure an OSPF interface.
To display the Interface Configuration page, click Routing
OSPF Advanced Interface
Configuration.
1. Interface - The interface for which data is to be displayed or configured.
2. Use Area ID to enter the 32-bit integer in dotted decimal format that uniquely identifies the
OSPF area to which the selected router interface connects. If you assign an Area ID which
does not exist, the area will be created with default values.
3. Use Admin Mode* to select enable or disable. The default value is 'disable.' You can
configure OSPF parameters without enabling OSPF Admin Mode, but they will have no
effect until you enable Admin Mode. The following information will be displayed only if the