Netgear GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual
Download Operation & user’s manual of NETGEAR GSM7228PS Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: NETGEAR
Category: Network Router , Switch
Type: Operation & user’s manual
Model: NETGEAR GSM7228PS , NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch
Pages: 628
362 | Chapter 4. Routing
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
PIM-SM
From the PIM-SM link, you can access the following pages:
• PIM-SM Global Configuration on page 362
• PIM SSM Configuration on page 363
• PIM-SM Interface Configuration on page 364
• PIM-SM Neighbor on page 366
• PIM-SM Candidate RP Configuration on page 367
• PIM-SM BSR Candidate Configuration on page 368
• PIM-SM Static RP Configuration on page 369
PIM-SM Global Configuration
To display the PIM-SM Global Configuration page, click Routing Multicast PIM-SM
Global Configuration.
1. Use Admin Mode to set the administrative status of PIM-SM in the router. The default is
disable.
2. Use Data Threshold Rate (kbps) to enter the rate in K bits/second above which the
last-hop router will switch to a source-specific shortest path tree. The valid values are from 0
to 2000. The default value is 0
3. Use Register Threshold Rate (kbps) to enter the rate in K bits/second above which the
Rendezvous Point router will switch to a source-specific shortest path tree. The valid values
are from 0 to 2000. The default value is 0