Netgear GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual
Download Operation & user’s manual of NETGEAR GSM7228PS Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: NETGEAR
Category: Network Router , Switch
Type: Operation & user’s manual
Model: NETGEAR GSM7228PS , NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch
Pages: 628
Chapter 4. Routing | 363
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
PIM SSM Configuration
While PIM-SM employs a specially-configured RP router that serves as a meeting junction for
multicast senders and listeners, Protocol-Independent Multicast Source Specific Multicast
(PIM-SSM) does not use an RP. It supports only source route deliver trees. It is used
between routers so that they can track which multicast packets to forward to each other and
to their directly-connected LANs. The SSM service model can be implemented with a strict
subset of the PIM-SM protocol mechanisms. Both regular IP Multicast and SSM semantics
can coexist on a single router and both can be implemented using the PIM-SM protocol. A
range of multicast addresses, currently 232.0.0.0/8 in IPv4, is reserved for SSM.
To display the PIM SSM Configuration page, click Routing
Multicast PIM-SM SSM
Configuration.
1. Use SSM Group Address to enter the source-specific multicast group ip-address.
2. Use SSM Group Mask to enter the source-specific multicast group ip-address mask.
3. Click ADD to add a new source-specific group.
4. Click DELETE to delete an existing source-specific group.