Netgear GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual
Download Operation & user’s manual of NETGEAR GSM7228PS Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: NETGEAR
Category: Network Router , Switch
Type: Operation & user’s manual
Model: NETGEAR GSM7228PS , NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch
Pages: 628
380 | Chapter 4. Routing
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
1. Interface - The interface for which data is to be configured or to be displayed.
2. Use Admin Mode to set the administrative status of PIM-SM in the router. The default is
disable.
3. Use Hello Interval(secs) to enter the time in seconds between the transmission of which
PIM Hello messages on this interface. The valid values are from 0 to 18000. The default
value is 30.
4. Use Join/Prune Interval(secs) to enter the frequency at which PIM Join/Prune messages
are transmitted on this PIM interface. The valid values are from 0 to 18000. The default
value is 60.
5. Use BSR Border to set BSR border status on the selected interface.
6. Use DR Priority to enter the DR priority for the selected interface. The valid values are from
0 to 2147483647. The default value is 1.
Table 73.
Field Description
Protocol State The state of PIM-SM in the router: either operational
or non-operational.
IPv6 Prefix/Length The IPv6 Address Prefix and the Length of the
selected interface.
Designated Router The Designated Router on the selected PIM
interface.
Neighbor Count The number of PIM neighbors on the selected
interface.