Netgear GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual
Download Operation & user’s manual of NETGEAR GSM7228PS Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: NETGEAR
Category: Network Router , Switch
Type: Operation & user’s manual
Model: NETGEAR GSM7228PS , NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch
Pages: 628
Chapter 2. Configuring System Information | 41
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
SNTP Global Status
The following table displays SNTP Global Status information.
Table 2-11.
Field Description
Version Specifies the SNTP Version the client supports.
Supported Mode Specifies the SNTP modes the client supports.
Multiple modes may be supported by a client.
Last Update Time Specifies the local date and time (UTC) the SNTP
client last updated the system clock.
Last Attempt Time Specifies the local date and time (UTC) of the last
SNTP request or receipt of an unsolicited message.
Last Attempt Status Specifies the status of the last SNTP request or
unsolicited message for both unicast and broadcast
modes. If no message has been received from a
server, a status of Other is displayed. These values
are appropriate for all operational modes.
• Other - None of the following enumeration
values.
• Success - The SNTP operation was successful
and the system time was updated.
• Request Timed Out - A directed SNTP request
timed out without receiving a response from the
SNTP server.
• Bad Date Encoded - The time provided by the
SNTP server is not valid.
• Version Not Supported - The SNTP version
supported by the server is not compatible with the
version supported by the client.
• Server Unsynchronized - The SNTP server is not
synchronized with its peers. This is indicated via
the 'leap indicator' field on the SNTP message.
• Server Kiss Of Death - The SNTP server
indicated that no further queries were to be sent to
this server. This is indicated by a stratum field
equal to 0 in a message received from a server.
Server IP Address Specifies the IP address of the server for the last
received valid packet. If no message has been
received from any server, an empty string is shown.
Address Type Specifies the address type of the SNTP Server
address for the last received valid packet.
Server Stratum Specifies the claimed stratum of the server for the
last received valid packet.
Reference Clock Id Specifies the reference clock identifier of the server
for the last received valid packet.