Netgear GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual
Download Operation & user’s manual of NETGEAR GSM7228PS Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: NETGEAR
Category: Network Router , Switch
Type: Operation & user’s manual
Model: NETGEAR GSM7228PS , NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch
Pages: 628
422 | Chapter 5. Configuring Quality of Service
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
2. Select the queue to which packets will of this policy-class will be assigned. This is an integer
value in the range 0 to 7.
3. Configure the policy attributes:
• Drop - Select the drop radio button. This flag indicates that the policy attribute is
defined to drop every inbound packet.
• Mark VLAN CoS - This is an integer value in the range from 0 to 7 for setting the
VLAN priority.
• Mark IP Precedence - This is an IP Precedence value in the range from 0 to 7.
• Mark IP DSCP - This lists the keywords for the known DSCP values from which one
can be selected. The list includes 'other' as an option for the remaining values.
• Simple Policy - Use this attribute to establish the traffic policing style for the specified
class. This command uses single data rate and burst size resulting in two outcomes
(conform and violate).
4. If you select the Simple Policy attribute, you can configure the following fields:
• Color Mode - This lists the color mode. The default is 'Color Blind'.
• Color Blind
• Color Aware
Color Aware mode requires the existence of one or more color classes that are valid
for use with this policy instance. A valid color class contains a single, non-excluded
match criterion for one of the following fields (provided the field does not conflict with
the classifier of the policy instance itself):
• CoS
• IP DSCP
• IP Precedence
• Committed Rate - This value is specified in the range 1 to 4294967295
kilobits-per-second (Kbps).
• Committed Burst Size - This value is specified in the range 1 to 128 KBytes. The
committed burst size is used to determine the amount of conforming traffic allowed.
• Conform Action - This lists the actions to be taken on conforming packets per the
policing metrics, from which one can be selected. The default is 'send'.
• Violate Action - This lists the actions to be taken on violating packets per the policing
metrics, from which one can be selected. The default is 'send'.
• For each of the above Action Selectors one of the following actions can be taken:
• Drop - These packets are immediately dropped.
• Mark IP DSCP - These packets are marked by DiffServ with the specified DSCP
value before being presented to the system forwarding element. This selection
requires that the DSCP value field be set.
• Mark CoS - These packets are marked by DiffServ with the specified CoS value
before being presented to the system forwarding element. This selection requires
that the Mark CoS value field be set.