Netgear GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual
Download Operation & user’s manual of NETGEAR GSM7228PS Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: NETGEAR
Category: Network Router , Switch
Type: Operation & user’s manual
Model: NETGEAR GSM7228PS , NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch
Pages: 628
Chapter 6. Managing Device Security | 463
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Inbound Telnet Configuration
This page regulates new telnet sessions. If Allow New Telnet Sessions are enabled, new
inbound telnet sessions can be established until there are no more sessions available. If
Allow New Telnet Sessions are disabled, no new inbound telnet sessions are established. An
established session remains active until the session is ended or an abnormal network error
ends the session.
1. Use Allow New Telnet Sessions to specify whether the new Inbound Telnet session is
Enabled or Disabled. Default value is Enabled.
2. Use Session Timeout to specify how many minutes of inactivity should occur on a telnet
session before the session is logged off. You may enter any number from 1 to 160. The
factory default is 5.
3. Use Maximum Number of Sessions to select how many simultaneous telnet sessions will
be allowed. The maximum is 5, which is also the factory default.
4. Current Number of Sessions - Displays the number of current sessions.
Outbound Telnet Client Configuration
This page regulates new outbound telnet connections. If Allow New Telnet Sessions are
enabled, new outbound telnet sessions can be established until there are no more sessions
available. If Allow New Telnet Sessions are disabled, no new outbound telnet sessions are
established. An established session remains active until the session is ended or an abnormal
network error ends the session.
1. Use Allow New Telnet Sessions to specify whether the new Outbound Telnet Session
is Enabled or Disabled. Default value is Enabled.
2. Use Maximum Number of Sessions to specify the maximum number of Outbound Telnet
Sessions allowed. Default value is 5. Valid Range is (0 to 5).
3. Use Session Timeout to specify the Outbound Telnet login inactivity time-out. Default value
is 5. Valid Range is (1 to 160).
4. Current Number of Sessions - Displays the number of current sessions.