Netgear GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual
Download Operation & user’s manual of NETGEAR GSM7228PS Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: NETGEAR
Category: Network Router , Switch
Type: Operation & user’s manual
Model: NETGEAR GSM7228PS , NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch
Pages: 628
506 | Chapter 6. Managing Device Security
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
DAI VLAN Configuration
To display the DAI VLAN Configuration page, click Security Control> Dynamic ARP
Inspection
DAI VLAN Configuration.
1. VLAN ID - Select the DAI Capable VLANs for which information has to be displayed or
configured.
2. Use Dynamic ARP Inspection to indicate whether the Dynamic ARP Inspection is enabled
on this VLAN. If this object is set to 'Enable' Dynamic ARP Inspection is enabled. If this
object is set to 'Disable', Dynamic ARP Inspection is disabled.
3. Use Logging Invalid Packets to indicate whether the Dynamic ARP Inspection logging is
enabled on this VLAN. If this object is set to 'Enable' it will log the Invalid ARP Packets
information. If this object is set to 'Disable', Dynamic ARP Inspection logging is disabled.
4. Use ARP ACL Name to specify a name for the ARP Access list. A vlan can be configured
to use this ARP ACL containing rules as the filter for ARP packet validation. The name can
contain up to <1-31> alphanumeric characters.
5. Use Static Flag to determine whether the ARP packet needs validation using the DHCP
snooping database in case ARP ACL rules don't match. If the flag is enabled then the ARP
Packet will be validated by the ARP ACL Rules only. If the flag is disabled then the ARP
Packet needs further validation by using the DHCP Snooping entries. The factory default is
disable.