Netgear GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual
Download Operation & user’s manual of NETGEAR GSM7228PS Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: NETGEAR
Category: Network Router , Switch
Type: Operation & user’s manual
Model: NETGEAR GSM7228PS , NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch
Pages: 628
Chapter 6. Managing Device Security | 513
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Captive Portal Global Configuration
Using the Captive Portal Global Configuration page, you can control the administrative state
of the CP feature and configure global settings that affect all captive portals configured on the
switch.
To display the Captive Portal Global Configuration page, click Security
Control> Captive
Portal
CP Global Configuration.
1. Use Admin Mode to enable or disable Captive Portal feature. By default, the Captive
Portal feature is disabled.
2. Use Additional HTTP Port to configure an additional port for HTTP traffic (HTTP traffic uses
port 80), but you can configure an additional port for HTTP traffic. Enter a port number
between 0-65535 (excluding port 80). Enter 0 to unconfigure the Additional HTTP Port.
Default is 0.
3. Use Additional HTTP Secure Port to configure an additional port for HTTP Secure traffic
(HTTP Secure traffic uses port 443). Enter a port number between 0-65535 (excluding port
443).Enter 0 to unconfigure the Additional HTTP Secure Port. Default is 0.
4. Use Authentication Timeout to specify the number of seconds to keep the authentication
session open with the client. To access the network through a portal, the client must first
enter authentication information on an authentication Web page. When the time-out expires,
the switch disconnects any active TCP or SSL connection with the client. The valid range is
60 to 600 seconds. Default Authentication Timeout is 300 seconds.