Netgear GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual
Download Operation & user’s manual of NETGEAR GSM7228PS Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: NETGEAR
Category: Network Router , Switch
Type: Operation & user’s manual
Model: NETGEAR GSM7228PS , NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch
Pages: 628
74 | Chapter 2. Configuring System Information
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
1. Use Pool Name to select one DHCPv6 pool to be configured.
2. Use Prefix/Prefix Length to specify the delegated IPv6 prefix.
3. Use DUID to identify the client's unique duid value. The format is xx:xx:xx:xx:xx:xx.
RFC3315 defines three types:
a. Link-layer address plus time:
- 00:01:hardware type:time:link-layer address
- hardware type - 16 bit hardware type reserved by IANA. 1 means an Ethernet
device.
- time: 32-bit unsigned integer - The time in seconds when this DUID was
generated since 00:00:00 1/1/2000.
- link-layer address - The link layer address of a device generating the DUID.
b. Vendor-assigned unique ID based on Enterprise Number:
- 00:02:enterprise-number:identifier
- enterprise-number - 32-bit integer reserved by IANA.
- identifier - Variable length data for each vendor
c. Link-layer address:
- 00:03:hardware type:link-layer address
- hardware type - 16 bit hardware type reserved by IANA. 1 means an Ethernet
device.
- link-layer address - The link layer address of a device generating the DUID.
4. Use Client Name to specify client's name. This is useful for logging or tracing only. It may be
up to 31 alphanumeric characters.
5. Use Valid Lifetime to specify the valid lifetime in seconds for delegated prefix.
6. Use Prefer Lifetime to specify the prefer lifetime in seconds for delegated prefix.
7. Click ADD to add a new delegated prefix for the selected pool.
8. Click DELETE to delete the delegated prefix for the selected pool.