• Home
• Brands
• Nordyne Manuals
• Nordyne MS3BC018KA
• Nordyne MS3BC042KA Installation Instructions Manual

Nordyne MS3BC042KA Installation Instructions Manual

Download Installation instructions manual of Nordyne MS3BC018KA Air Conditioner for Free or View it Online on All-Guides.com. This version of Nordyne MS3BC018KA Manual compatible with such list of devices, as: MS3BC018KA, MS3BC024KA, MS3BC036KA, MS3BC042KA, MS3BC060KA

1

2

3

4

5

6

7

8

Outdoor Air Conditioner

12 SEER Extra High Efficiency Split System

These units have been designed and tested for

capacity and effici encyin accordance with A. R.I.

Standards. Split System Heat Pump units are

designed for use with a wide variety of fossil fuel

furnaces, electric furnaces, air handlers, and

evaporator coil combinations.

These instructions are primarily intended to

assist qualified individuals experienced in the

proper installation of heating and/or air

conditioning appliances. Some local codes

require licensed installation/service personnel

for this type of equipment. Read all instructions

carefully before starting the installation.

USER'S INFORMATION

Read this owner information to become familiar

with the capabilities and use of your appliance.

Keep this with literature on other appliances

where you have easy access to it in the future.

If a problem occurs, check the instructions and

follow recommendations given. If these sug-

gestions don't eliminate your problem, call your

servicing contractor .

OPERATING INSTRUCTIONS

To Operate You rAi r Conditioner for

Cooling

1. Set the thermostat system switch to COOL

or AUTO and the thermostat fan switch to

AUTO. (See Figure 1)

2. Set the thermostat temperature to the

desired temperature level using the tem-

perature selector. Please refer to the sepa-

rate detailed thermostat user's manual for

complete instructions regarding thermo-

stat programming. The outdoor unit and

indoor blower will both cycle on and off to

maintain the indoor temperature at the

desired cooling level.

To Operate Your Furnace for

Heating

1. Set the thermostat system switch to HEAT

or AUTO and the thermostat fan switch to

AUTO. (See Figure 1)

.

Set the thermostat temperature to the

desired temperature level using the tem-

perature selector. Please refer to the sepa-

rate detailed user's manual for complete

thermostat programming instructions. The

furnace and indoor blower will cycle on and

off to maintain the indoor temperature at

the desired heating level.

To Shut Off Your Air Conditioner

Set the thermostat system switch to OFF and the

thermostat fan switch to AUTO. (See Figure 1)

The system will not operate, regardless of the

thermostat temperature setting.

To Operate the Indoor Blower

Continuously

Set the thermostat fan switch to ON (See

Figure 1)

The indoor blower will start immediately, and

will run continually until the fan switch is reset to

AUTO.

SYSTEM SWITCH

FAN SWITCH

TEMPERATURESCALES

TEMPERATURE

SELECTOR

Figure 1. Typical Thermostat