Oki B 4200 Hardware User Manual

Download Installation instructions of Oki B4300n All in One Printer, Computer Hardware for Free or View it Online on All-Guides.com. This version of Oki B4300n Manual compatible with such list of devices, as: B4300n, B 4200, B 4300, B4300

Oki B4300n Installation instructions - Page 1
1
Oki B4300n Installation instructions - Page 2
2
(continued on back)
Caution!
To avoid damage by static electricity
or rough handling, keep the memory
card in its packaging until you're
ready to install it.
Note: The printer has only one slot in
which to install an optional
RAM Memory card.
1. Turn off the printer, and remove the
power cord and interface cable.
2. On the back of the printer, loosen
the access panel screw and remove
the access panel.
3. Locate the slot for the card:
Caution!
To avoid damage to the RAM card,
ground yourself (touch metal) before
handling it.
4. Remove the RAM memory card
from its packaging.
5. Hold the card with the gold contact
edge down and the notched corner
(
1) aimed away from you.
6. Insert the card in the slot—notched
corner (
1) away from you—and
press down firmly until it snaps
into place.
The blue tab (circled) will move up
to the locked position.
7. Replace the access panel:
a. Align the tabs at the bottom of
the access panel with the slots in
the printer.
b. Swing the panel up and tighten
the screw to secure it in place.
8. Reattach the interface cord and
power cable, then turn on the
printer.
9. Print a MenuMap.
Model B4200
a. Press and release
CONTROL.
The printer goes off line.
b. Press and hold
CONTROL for at
least 2 seconds, but no more that
5 seconds.
The MenuMap Prints.
RAM Memory Expansion Options
for B4200 and B4300
Installation Instructions
Oki 70042301
(16 MB)
Oki 70042401
(32 MB)
Oki Data Americas, Inc., 2000 Bishops Gate Blvd., Mt. Laurel, NJ 08054-4620
Phone: (856) 235-2600 Fax: (856) 222-5320 http://www.okidata.com http://my.okidata.com