Oki C9300 Installation Instructions

Download Installation instructions of Oki C9300dxn All in One Printer, Computer Accessories for Free or View it Online on All-Guides.com. This version of Oki C9300dxn Manual compatible with such list of devices, as: C9300dxnColorSignage, C9300n, C9300nccs, C9500dxn, C9500dxnccs

Oki C9300dxn Installation instructions - Page 1
1
Oki C9300dxn Installation instructions - Page 2
2
C9300/C9500 Duplexer
Installation Instructions
Duplexer Part Number: 70040501
58364001
Phase 1 - Install
If you will be using the duplex
unit to print complicated files
with graphics, you need to pur-
chase and install 64 MB additional
printer memory (OKI # 70041001).
1. Unpack the duplex unit and remove
any shipping materials.
2. Turn off the printer and then pull
out Tray 1.
3. Push up on the latches at either end
of the front cover and remove it
from the printer.
Do not throw the front cover
away; it is required if the
duplexer is removed from the
printer.
4. Place the duplex unit on top of Tray
1 and align it so that it is flush with
the tray.
5. Open the small cover on the duplex
unit and pull the blue handle gently
until the duplex unit and Tray 1 are
locked together.
6. Gently slide the tray/duplex unit
back into the printer.
7. Turn back on the printer.
Phase 2 - Activate the Duplex
Unit in the Driver
WINDOWS® PCL DRIVER
1. Click Start — Settings —
Printers
. The Printers dialog box
opens.
2. Right-click the OKI C9300 or
C9500 PCL printer icon, then click
Printing Preferences (Windows
2000),
Properties (Windows XP,
Me, 98, 95) or
Document
Defaults
(Windows NT 4.0).
3. On the
Paper tab, click Device
options. Or, with Windows XP,
select the
Device Option tab.
4. Click
Duplex option unit to select
it, then click
OK.
5. Click
OK, then close the Printers
dialog box.
WINDOWS POSTSCRIPT® DRIVER
1. Click Start — Settings —
Printers
. The Printers dialog box
opens.
2. Right click the OKI C9300 or
C9500 PostScript printer icon, then
click
Properties.
3. Change the setting:
WINDOWS XP, 2000 AND NT 4.0:
a. Click the
Device Settings tab.
b. Scroll down to
Installable
Options
and click Duplex.
c. Under
Change ‘Duplex’ Set-
ting
, click Installed.
W
INDOWS ME, 98 AND 95:
a. Click the
Device Options tab.
b. Click
Duplex.
c. Under
Change setting for:
Duplex, click Installed.
4. Click OK, then close the Printers
dialog box.
MACINTOSH® DRIVER (OSX)
1. As of OS 10.1.5, Apple has not
enabled Printer Options
adjustment. Therefore, this
selection is unavailable.
MACINTOSH® DRIVER (CLASSIC)
1. Activate Chooser from the Apple
menu.
2. Select
LaserWriter 8.
3. Click
Printer — Setup.
4. Click
Configure.
5. Change the
Duplex setting to
Installed.
6. Click
OK twice.
7. Close
Chooser.
!
!