OKIDATA Microline ML395 Handbook
Download Handbook of Oki Microline ML395 Printer for Free or View it Online on All-Guides.com. This version of Oki Microline ML395 Manual compatible with such list of devices, as: Microline ML395, Microline ML395C, Microline ML395, Microline ML395C
Category: Printer
Type: Handbook
Model: Oki Microline ML395 , Oki Microline ML395C , OKIDATA Microline ML395 , OKIDATA Microline ML395C
Pages: 79
Installing/Replacing the Ribbon
Installing/Replacing the Ribbon
1. Make sure printer is turned off.
2. Holding the posts, move printhead to center of platen.
Caution! If you are replacing the ribbon, printhead may be HOT!
3. If you are replacing the ribbon: slide ribbon off printhead posts, remove cartridge from printer, and
discard used cartridge.
4. Unpack ribbon, remove its shipping restraint, and push idler roller latch in.
5. Place ribbon cartridge in printer: pins on either end of car-tridge fit in notches in plates on either
side of printer platen. Push down on cartridge until it clicks into place (see diagram on cartridge).
Note Turn knob in direction of arrow if cartridge does'nt fit into place easily.
5. Thread ribbon around posts as shown, then turn take-up knob clockwise to eliminate ribbon
slack.Making Connections
ML395 ( 96-02-07 )