Planet Technology WGSD-910 Specifications
Download Datasheet of Planet Technology WGSD-910 Switch for Free or View it Online on All-Guides.com.
1
2
3
4
WGSD-910
Cost-effective Desktop Size / Fiber Capability / Group Managed
Switch
The PLANET WGSD-910 is a Desktop size L2 Managed Fast Ethernet
Switch. It provides 8 10/100Mbps Fast Ethernet ports and 1 Gigabit TP/SFP
interface. The Compact-size design not only makes the Desktop Switch
fit into space-limited environment but also is mountable in a 19-inch rack
with attached rack-mounting kits. The equipped Gigabit SFP slot makes
it with capability of fiber link for distance extending and can handle
extremely large amounts of data in a secured topology which is linked to a
backbone or high capacity servers.
The various support of QoS mode and VLAN features make the WGSD-910
meet the needs of effective data traffic control for SOHOs, SMBs and
Enterprises, such as VoIP, video streaming and multicast applications. The
key features are shown as below:
• IP Stacking up to 8 units • 802.1Q VLAN
• Rapid Spanning Tree • SNMP / SNMP Trap
• IGMP Snooping • SFP slots, Fiber link capability
Enhanced Layer 2 Features
The WGSD-910 can be programmed for basic switch management
functions, such as per port speed configuration, Port Trunking, VLAN,
Rapid Spanning Tree, QoS, bandwidth control and IGMP Snooping. The
WGSD-910 provides Port-based VLAN, 802.1Q Tagged VLAN. And the
VLAN groups allowed on the WGSD-910 will be maximally up to 255. Via
supporting port trunking, the WGSD-910 offers the operation of a high-
speed trunk combining multiple ports. It also provides four groups of up to
8 ports for trunking and supports fail-over as well.
Efficient Management – Stacking Management
For efficient management, the WGSD-910 is equipped with console
interface, Web interface and SNMP agent. With its built-in Web-based
management, the PLANET WGSD-910 offers an easy-to-use, platform-
independent management and configuration facility. It supports standard
Simple Network Management Protocol (SNMP) and can be managed via
any standard-based management software. For text-based management,
the WGSD-910 can also be accessed via Telnet and the console port.
One of the management features of WGSD-910 is the IP Stacking function
support. It helps network managers to easily configure up to 8 switches in
the same series via one single IP address instead of connecting and setting
each unit one by one.
Data Sheet
1
Key Features
PHYSICAL PORT
8-Port 10/100Base-TX RJ-45
1-PORT GIGABIT TP/SFP COMBO INTERFACE LAYER 2
FEATURES
Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE
802.3z Gigabit Ethernet standard
Auto-negotiation and half duplex/full duplex modes for all
10Base-T/100Base-TX and 1000Base-T ports.
High performance of Store–and-Forward architecture, broadcast
storm control and runt/CRC filtering eliminate erroneous packets
to optimize the network bandwidth
IEEE 802.1Q Tagged based VLAN and Port-based VLAN
Up to 4 Trunk groups, each trunk can be up to maximum 8 port
with 1.6Gbps bandwidth(Duplex Mode)
IEEE 802.1d, IEEE 802.1w, classic Spanning Tree Algorithm or
Rapid Spanning Tree support
QUALITY OF SERVICE
4 priority queues on all switch ports.
Strict priority and Weighted Round Robin (WRR) CoS policies
QoS and bandwidth control on each port
MULTICAST
IGMP Snooping v1 and v2
IGMP Port and Group policy
SECURITY
IEEE 802.1x Port-Based Authentication, RADIUS server
authentication or Local account authentication
MAC address Filtering and MAC address Binding
Port Mirroring to monitor the incoming or outgoing traffic on a
particular port
MANAGEMENT
WEB-based, Telnet, Console Command Line management
Access through SNMP v1 and v2c set and get requests.
Four groups (history, statistics, alarms, and events) of embedded
remote monitoring (RMON) agents for network monitoring and
traffic analysis
EMI standards comply with FCC, CE class
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8-Port 10/100Mbps + 1-Port Gigabit TP/SFP Combo
Managed Switch