Belkin OmniView F1DK102P Quick Start

Download Quick installation manual of Belkin 26PFL2908H/12 Switch for Free or View it Online on All-Guides.com.

Brand: Belkin

Category: Switch

Type: Quick installation manual

Model: Belkin 26PFL2908H/12 , Belkin OmniView F1DK102P

Pages: 2 (0.32 Mb)

Download Belkin 26PFL2908H/12 Quick installation manual

Belkin 26PFL2908H/12 Quick installation manual - Page 1
1
Belkin 26PFL2908H/12 Quick installation manual - Page 2
2
This sheet will guide you through the basic steps needed to
install the 2-Port KVM Switch with Built-In Cabling (the Switch). If you
have any problems during installation, please refer to the User Manual.
Introduction
Connecting the Keyboard, Video, and
Mouse to the Console Ports on the Switch
1
Connecting Computers to the Switch
2
1. Power down all computers.
2. Connect your PS/2-type keyboard and mouse to the KEYBOARD and
MOUSE ports located on the front panel of your Switch.
3. Take the video cable that is attached to your monitor and connect it to
the VGA port on the front panel of the Switch.
1. Using the attached cables, take the VGA cable and connect it to
the VGA port on the first computer.
2. Connect the PS/2 keyboard KVM cable to the keyboard port on
the computer.
3. Connect the PS/2 mouse KVM cable to the mouse port on
the computer.
Repeat Steps 1 through 3 for
the additional computer to be
connected to the Switch.
You will need the following items to install the Switch:
2-Port KVM Switch with Built-In Cabling
One (each) keyboard, monitor, and mouse