PROTRON PLTV-3250 Start Here
Download Operation & user’s manual of PROTRON PLTV-3250 TV for Free or View it Online on All-Guides.com.
1
2
MENU CH CH VOL VOL ENTER SOURCE POWER
MTS MENU
DISPLAY TV SOURCE
LIST SLEEP
PICTURE
SOUND
FAV. C.C. V-CHIP EPG
MUTE
ASPECT
VOL
VOL
CH
CH
Accessories
PLTV-3250
32" Liquid Crystal Display
User’s Manual
VGA Cable
PC Audio Cable RCA Cables
Component Video
Cables
HDMI D-SUB
ACIN
AV1 IN
AUDIO1
SC-ART 1
SC-ART 2
S-VIDEOIN
S-VIDEO
PC
AUDIOIN
VIDEO1
ANT
Remote
AAA Batteries
User’s Manual
Power Cord
Start Here
Easy Setup Instructions
Unpacking the Display and Accessories
1. Remove the contents of the box and place the display in its
intended location.
Accessories
Box
2. Plug in the display and turn it on.
Connecting Component Video Devices
(Ex: Progressive Scan DVD Player, HDTV Receiver)
1. Using three RCA cables, connect the three component video
outputs (Y, Pb, and Pr) to the corresponding jacks in one of the
two component video blocks on the display.
2. Using two other RCA cables, connect the right (red) and left
(white) audio outputs on the source to the corresponding jacks
in the same component video block used above.
R
L
Connecting a Digital TV (HDTV) Antenna
1. Connect a coaxial cable between the ATSC jack and TV signal
source.
Connecting HDMI Devices
1. Using an HDMI cable, connect the HDMI device to the HDMI
input on the bottom of the display.
HDMI D-SUB
AV IN
AUDIO
SC-ART 1
S-VIDEO IN
S-VIDEO
PC
AUDIO IN
VIDEO
Connecting an Analog TV Signal
(Ex: Cable Box, Satellite Receiver, Antenna)
1. Connect a coaxial cable between the NTSC jack and TV signal
source.
Note: If you would like to be able to record the TV signal,
connect the TV signal source to the recording device, then
connect the recording device to the display.
Connecting Composite Video Devices
(Ex: VCR, DVD Player)
1. Using an RCA cable, connect the composite video output
(yellow) on the source device to the corresponding jack in one
of the two composite video blocks: AV 1 IN on the bottom of
the display or AV 2 IN on the right side of the display.
2. Using two RCA cables, connect the right (red) and left (white)
audio outputs on the source to the corresponding jacks in the
same composite video block used above.
HDMI D-SUB RS-232
AV 1IN
AUDIO 1
SC-ART 1
S-VIDEO IN
S-VIDEO
PC
AUDIO IN
VIDEO 1
Vertical fold
Vertical fold
EZPLTV3250-1.indd 1 7/17/2006 7:58:36 PM