Berkel 909A Specifications
Download Specifications of Berkel 909A Kitchen Appliances for Free or View it Online on All-Guides.com.
Model 909A
Manual Gravity Feed Slicer
Item #
Standard Features
➤ 2-speed, 1/2 HP, totally enclosed and permanently
lubricated knife motor
➤ Furnished in 115/60/1, 5.5/4.5 amp, AC, ETL listed; also
available in 1/3 HP, 230/60/1, 2.9 amp, AC, ETL listed
➤ Low 12/5 VDC circuitry for added operator protection
➤ Finish is stainless steel and sanitary burnished aluminum;
unit disassembles quickly without tools for easy cleaning
➤ Nominal 12-1/2” (318 mm) diameter, hollow ground,
hardened and polished forged stainless steel knife
➤ Precise slice adjustment to a thickness of
27/32” (21 mm)
➤ The carriage handles food up to 11” (280 mm) wide,
by 6” (152 mm) high or 8” (203 mm) diameter
➤ Rear-mounted, stainless steel meat pusher extends over
the entire length of the product table
➤ Ergonomic style handle for ease of use
➤ Built-in, top-mounted, two stone knife sharpener with
single lever, dual-action system for a lasting, razor-sharp
edge
➤ Permanent, tapered knife ring guard covers non-slicing
portion of knife even when the sharpener and center
plate are removed
➤ Center plate interlock prevents the slicer from running
when center plate is removed
➤ No-Volt release prevents activation of the slicer in the
event of power interruption; operator must restart the
slicer
➤ Gauge plate interlock prevents removal of the product
table until it is in the full forward or home position and the
gauge plate is fully closed; once table is removed, gauge
plate cannot be reopened
➤ Built-in timer automatically shuts the slicer off after
15 seconds of non-use
➤ Q-P-Q nickel plated transport slide rod with reservoir wick
for reduced wear
➤ On/off, 3-position, moisture protected switch with
power light
➤ Attached 6-foot, flexible, 3-wire cord and plug for
grounded receptacle
Manual Gravity Feed Slicer Model 909A
Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700
574-232-8222 • 800-348-0251 • FAX 888-888-2838 • www.berkel.com
Form #SPC08-0902N
Safety and Convenience Features
Berkel Model 909A manual gravity feed slicer features
Berkel’s time proven hollow ground stainless steel knife,
built-in, single lever, dual action sharpener and many safety
features. The permanent, tapered guard covers the non-slicing
portion of the knife even when the sharpener and center
plate are removed. The gauge plate interlock prevents the
product table from being removed unless it is in the full
forward or home position and the gauge plate is closed.
Removing the product table locks the gauge plate in the
closed position. The center plate interlock prevents the slicer
from operating if the center plate is removed. A built-in timer
automatically shuts off the unit after 15 seconds of non-use.
Units are easy to clean and disassemble quickly without tools.
Accessories
❏ Stainless steel vegetable ❑ 4” Extension NSF
chute with pusher legs (set of 4)
❏ Skewers with coring tool ❏ SURE-LOCK LIFT™
❏ Sharpening kit ❏ Slaw tray
❏ Receiving tray ❏ Juice cup
❑ Product fence
Approved By:
Date
Options
❏
1/3 HP, 230/60/1, 2.9 amp, AC, ETL listed
C
Model 909A