GAI-Tronics 707-001-EX Maintenance Manual

Download Maintenance manual of GAI-Tronics 707-001-EX Amplifier for Free or View it Online on All-Guides.com.

GAI-Tronics 707-001-EX Maintenance manual - Page 1
1
GAI-Tronics 707-001-EX Maintenance manual - Page 2
2
GAI-Tronics 707-001-EX Maintenance manual - Page 3
3
GAI-Tronics 707-001-EX Maintenance manual - Page 4
4
GAI-Tronics 707-001-EX Maintenance manual - Page 5
5
GAI-Tronics 707-001-EX Maintenance manual - Page 6
6
GAI-Tronics 707-001-EX Maintenance manual - Page 7
7
GAI-Tronics 707-001-EX Maintenance manual - Page 8
8
GAI-Tronics 707-001-EX Maintenance manual - Page 9
9
GAI-Tronics 707-001-EX Maintenance manual - Page 10
10
GAI-Tronics 707-001-EX Maintenance manual - Page 11
11
GAI-Tronics 707-001-EX Maintenance manual - Page 12
12
Pub. 42004-703L2A
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 800-492-1212 Fax: 610-796-5954
V
ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
GAI-TRONIC CORPORATION
A HUBBELL COMPANY
Model 707-001-EX-F07045
SmartSeries Hazardous Area
Speaker Amplifier Enclosure
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
The Model 707-001-EX Speaker Amplifier Enclosure is a component of the 700 Series Page/Party<
system. It is constructed of cast aluminum and is extremely weatherproof and corrosion-resistant. This
enclosure is equipped with terminal strips for connecting system cable. The Model 709-901 SmartSeries
Amplifier mates directly with this enclosure.
N
OTE: The Model 707-001-EX-F07045 conduit or cable entries contain metric threads.
Installation
This enclosure must be installed by trained, qualified and
competent personnel. Installation must comply with state and
national regulations, as well as safety practices for this type of
equipment.
CAUTION
Do not install this equipment in
hazardous areas other than those indicated on the approval
listing in the Specifications section of this manual. Such
installation may cause a safety hazard and consequent injury
or property damage.
The mounting location must be flat and provide proper
clearance, rigidity and strength to support the enclosure and all
contained devices. The enclosure is equipped with factory-
installed hinges. The enclosure should be mounted with hinges
on the left.
Figure 1. Model 707-001-EX-F07045