Barco ClickShare Installer Quick Start Manual

Download Installer quick start manual of Barco ClickShare Computer Accessories, Projector Accessories for Free or View it Online on All-Guides.com.

Barco ClickShare Installer quick start manual - Page 1
1
Barco ClickShare Installer quick start manual - Page 2
2
Barco ClickShare Installer quick start manual - Page 3
3
Barco ClickShare Installer quick start manual - Page 4
4
Preparation:
When Installing ClickShare you will:
Step 1 - unpack the components.
Step 2 - install the Base Unit.
Step 3 - connect the Base Unit to A/C and the display.
Step 4 - access the Base Unit Admin Functions Using a Browser.
Step 5 - configure the system via the Web Interface.
Step 6 - test the installation.
Step 7 - pair the Button to the Base Unit if needed.
The tools you will need are:
For mechanical Install
Torx 10 Screwdriver if wall, ceiling or rack mounting
A drill if wall or ceiling mounting
A screwdriver depending on your wall mounting screws
The optional ClickShare Rack Mount Kit if installing in a rack
Order number: R9861006R01
For hookup to the display
A video cable, which is DVI-i from the Base Unit going to the display input (variable)
Optionally you can use the Display Port output on the Base Unit to the display input
For configuration of the system
A laptop computer with WiFi for configuring the Base Unit
For Troubleshooting
Two Ethernet cables for direct connect to the Base Unit though the local LAN
An Ethernet cross-over adapter or cable to connect directly to the Base Unit.
INSTALLER QUICK START GUIDE
ClickShare
Installer Quick Start Guide
vs#: 010913