Edge Cody 12" Installation Manual

Download Installation manual of Edge Cody 12" Light Fixture for Free or View it Online on All-Guides.com.

Brand: Edge

Category: Light Fixture

Type: Installation manual for Edge Cody 12"

Pages: 3

Download Edge Cody 12" Installation manual

Edge Cody 12
1
Edge Cody 12
2
Edge Cody 12
3
ARM
1.5MM ALLEN
WRENCH
M3 SET SCREW
SWIVEL
CONNECTOR
2
Installation Instructions for Cody 12" Canopy Mount Picture Light
904-CPL-12-01
Install the Fixture
1
CPL-12-_
1718 W. Fullerton Ave
Chicago, IL 60614
Tel: 773-770-1195
Fax: 773-935-5613
www.edgelighting.com
© 2009 Edge Lighting. All Rights Reserved.
1: Rotate the Cody's head perpendicular to the arm making
sure the arm is completely inserted into the head swivel
connector. Tighten the M3 set screw on the swivel connector
with the provided 1.5mm Allen wrench to secure the head in
place.
SAVE THESE INSTRUCTIONS!
- This product is ETL listed for indoor location.
- This product is wall mounted only.
- This product can mount to either a 4" square electrical box
with round plaster ring or an octagon electrical box.
- This instruction shows a typical installation.
IMPORTANT INFORMATION
A
1
HEAD
ARM
1.5MM ALLEN
WRENCH
M3 SET SCREW
SWIVEL
CONNECTOR
1
B
HEAD
2: Insert the loose arm assembly (provided in the box) into the
other swivel connector, insert the joining arm into the
mounting bracket of the first arm. Tighten the M3 set screw
on the swivel connector with the
1.5mm Allen wrench.
and mounting bracket
HEAD
ARM
JOINING ARM
MOUNTING BRACKET
2