Acoustic Research PW1000 Quick Start Manual
Download Quick start manual of Acoustic Research PW1000 Home Theater System, Stereo System for Free or View it Online on All-Guides.com.
Brand: Acoustic Research
Category: Home Theater System , Stereo System
Type: Quick start manual for Acoustic Research PW1000
Pages: 6 (2.82 Mb)
1
2
3
4
5
6
PW1000 Front
Panel Input
PW1000 Back Panel Connection to TV or A/V Receiver
A/V receiver or
TV input name
Home Theater
Power Station
with
Quick Start Guide
Front Panel Back Panel
Front and back panel AC and USB power
outlets and coaxial jacks that provide
surge protection and power conditioning
for connected components.
Front panel audio/video jacks that pass
their signal through to corresponding
back panel audio/video jacks. The
signal goes directly to the home theater
component that’s connected to those
jacks.
Network connectivity for your modem
and up to four connected Internet
devices. The input for your modem is
on the back panel, along with three of
the Ethernet output ports. The fourth
Ethernet output port is on the front
panel, for easy access by devices that
are just visiting your home theater.
Note: The outlets and jacks on the front panel of the PW1000 are covered
by a door. To access these jacks and outlets, press down on this door.
PW1000 Back Panel
TV or A/V
Receiver
CMPNT INPUT
VIDEOAUDIODIGITAL
COAX
12 2
OR
PW1000 Back Panel
TV or A/V
Receiver
HDMI INPUT
PW1000 Back Panel
TV or A/V
Receiver
AUDIO
PW1000 Back Panel
TV or A/V Receiver
USB IN
This Quick Start Guide helps you set
up your PW1000 in three quick and
easy steps:
SpeedPass
Power /
Charging /
Signal
Protection
Ethernet
Switch
It starts with a quick tour of the
PW1000 front and back panels.
Tour of the PW1000
Power /
Charging /
Signal
Protection
SpeedPass
Ethernet
Switch
The front and back panels of the PW1000 offer jacks, outlets, and ports for a variety of uses in your home theater. These jacks, outlets,
and ports are grouped together according to their use. These diagrams map out these different regions on the front and back panels.
SpeedPass
PW1000 Back Panel
TV or A/V
Receiver
VIDEOR AUDIO L
VID INPUT
12
SpeedPass makes it quick and easy to connect portable devices
to your home theater by bringing connections for these devices
to the front of your home theater setup—but to use these front
panel connections, you must connect the corresponding jacks on
the back of the PW1000. This section shows you how.
PC/LAPTOP
CAMCORDER
GAMING
CONSOLE
TABLET/
SMARTPHONE
MP3 PLAYER/
SMARTPHONE
Should I connect to my TV or my A/V receiver?
As a general rule, you should connect the PW1000 back panel jacks to the
component you use to switch signals. So, for example, if you use an A/V
receiver switch between your Blu-ray player and satellite receiver, then you
should connect the PW1000 back panel to your A/V receiver.
To use the USB PASS THROUGH jack:
Use a USB cable (not included) to connect the
PW1000 back panel jack to your A/V receiver or TV.
To use the COMPONENT VIDEO and AUDIO jacks:
1. Make the video connection:
Use component video cables (not included) to connect the
PW1000 to your A/V receiver or TV.
2. Make the audio connection:
Use either a digital coaxial cable (not included) or a stereo
audio cable (not included) to connect the PW1000 to your
A/V receiver or TV—use the audio input grouped with the
component video jacks on your A/V receiver or TV.
To use the HDMI PASS THROUGH jack:
Use an HDMI cable (not included) to connect the
PW1000 back panel jack to your A/V receiver or TV.
To use the MP3/AUDIO jack: Use a stereo
audio cable (not included) to connect the PW1000
back panel jack to your A/V receiver or TV.
To use the VIDEO and AUDIO jacks:
1. Use a video cable (not included) to connect the PW1000 to your
A/V receiver or TV.
2. Use a stereo
audio cable
(not included)
to connect
the PW1000
to your A/V
receiver or TV.
SETUP
PW1000 QSG English 00